Asco Solenoid Valve SC E222E002 LT-230V 50HZ, 2 port , NC, 230 V ac, 1/2in

  • RS Stock No. 656-3298
  • Mfr. Part No. SC E222E002 LT-230V 50HZ
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

222 LT series 2 / 2 assisted control solenoid valves

2 / 2 N/C assisted control, hung piston solenoid valves for cryogenic service.
Solenoids with two orifices for heavy-duty systems and compatible pressurised fluids.
For use with fluids at low pressure and high flow rate.
Do not require a minimum operating pressure.
Valves are degreased, tested and packed to keep them free from moisture.
Liquid oxygen valves are UV-light tested to check for any hydrocarbons.
Valves are constructed as a drawn seamless stainless steel core tube to ensure sealed separation of electrical parts and the fluid controlled.
These solenoid valves must be mounted vertically with the magnetic head upright.
Pluggable connectors.


ISO 4400 - IEC 335

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 1/2 in Rp Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Cryogenic Liquid
Type 2/2
Orifice Diameter 16mm
Body Material Brass
Maximum Working Pressure 9 bar
Operating Temperature Range -196 → 90 °C
Minimum Operating Temperature -196°C
Maximum Operating Temperature +90°C
Connection Gender Female
Series 222LT
Flow Factor Kv 3.3m³/h
Thread Standard or Connection Type Rp
Maximum Opening Time 100ms
Maximum Closing Time 100ms
8 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 933.38
(exc. GST)
$ 1,073.39
(inc. GST)
Per unit
1 +
Related Products
Two-way, brass-bodied WRAS listed solenoid valves with anti-water ...
Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain ...
Two-way, normally closed, condensate drain valve assembly with ...
Two-way, normally closed, condensate drain valve assembly with electronic timer. Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods. Timer designed for automatic control of condensate draining ...
IMI Buschjost 82530 series of solenoid valves are ...
IMI Buschjost 82530 series of solenoid valves are a range of 2/2 way valves which are pilot operated. They can be used for liquid or gas and feature a normally closed switching function as standard. Diaphragm valve for neutral gaseous ...
Parker 2-way solenoid valves are used in a ...
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...