Burkert Solenoid Valve 93970018, 2 port , NC, 230 V ac, 3/4in

  • RS Stock No. 804-1970
  • Mfr. Part No. 221633
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Burkert Solenoid Valve

The Burkert 221 series 3/4inG female solenoid valve has a supply voltage of 230VAC. This 2-port NC position valve has soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision-engineered main body path helps ensure quiet water hammer free operation. It is manufactured from brass and designed for use with water and inert liquids and gases.
Due to their internal complexity, these valves can only be used with clean neutral media Electrical connector can be ordered separately
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Features and Benefits

Maximum working pressure is 10bar
Compact size to aid installation when space is limited
Coupled spring diaphragm system opened without differential pressure
Flow factor(Kv) is 8.3m³/h
Orifice diameter is 20mm
Flow-optimized housing and diaphragm geometry for high flow
Operating temperature is between -10°C and 80°C
Power consumption is 10W
Sealed coil and high flow rate


Compressed air and vacuum systems
Heating and refrigeration
Water treatment and swimming pool technology


IP65 rated

Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 3/4 in G Female
Connection Size 3/4in
Default Valve Position NC
Suitable Applications Liquid
Type 2/2
Orifice Diameter 20mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +80 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +80°C
Flow Factor Kv 8.3m³/h
Connection Gender Female
Series 221
Servo Assist Yes
Thread Standard or Connection Type G
40 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 263.90
(exc. GST)
$ 303.48
(inc. GST)
Per unit
1 +
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments. Duty cycle intermittent operation 40% 30 min8W nominal coil power. Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Insensitive to contaminated fluids except for sharp, solid ...
Insensitive to contaminated fluids except for sharp, solid and long fibres. Body and lid material PVC; internal parts PVDF and PVC; EPDM seals. Double seal to valve interior. Non-metallic valve internals. Lockable manual override. Pressure range: 0.5 to 6 bar. ...
Manifold type mounting valve. Medium is only in ...
Manifold type mounting valve. Medium is only in contact with the valve internals and body. High quality seal material FPM (Viton) standard. Coil can be changed easily with valve in place. Coil can be locked in 4 x 90° positions ...