RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Burkert Solenoid Valve 221760, 2 port , NC, 110 V, 3/8in

This image is representative of the product range


2 In stock for delivery within 7 working day(s)
Add to Basket

Price (ex. GST) Each

$299.06

(exc. GST)

$343.92

(inc. GST)

units

Added

RS Stock No.:
804-2021
Mfr. Part No.:
221760
Manufacturer:
Burkert
COO (Country of Origin):
DE
unitsPer unit
1 +$299.06

DS6213-EV Series 2/2 Stainless Steel Solenoid valves


Burkerts new range of 2 way normally closed solenoid valves. Manufactured from stainless steel and designed for use with water and inert liquids and gases. A soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision engineered main body path helps ensure quiet, water hammer free operation.
Suitable for a diverse range of applications including compressed air and vacuum systems, heating and refrigeration, water treatment and swimming pool technology. Compact size to aid installation when space is limited


0-10 bar operating pressure
0.1-4 second response time
Opens without differential pressure
Minimum pressure differential of 0.5 bar for full opening
High flow rate
Sealed coil
IP65 Rating


Note

Due to their internal complexity these valves can only be used with clean neutral media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

AttributeValue
Supply Voltage110 V
Number of Ports2
OperationPilot
Connection3/8 in G Female
Connection Size3/8in
Default Valve PositionNC
Suitable ApplicationsGas, Air, Vacuum Applications
Type2/2
Orifice Diameter10mm
Body MaterialBrass, Nickel Plated Brass, Stainless Steel
Maximum Working Pressure10 bar
Operating Temperature Range0 → +120 Epoxy Coil (FKM) °C, 0 → +90 Polyamide Coil (FKM) °C, -10 → +80 (NBR) °C, -30 → +100 Epoxy Coil (EPDM) °C, -30 → +90 Polyamide Coil (EPDM) °C
Minimum Operating Temperature0 °C, -10 °C, -30 °C
Maximum Operating Temperature+100 °C, +120 °C, +80 °C, +90 °C
Maximum Opening Time4s
Servo AssistYes
Connection GenderFemale
Maximum Closing Time4s
Series221
Thread Standard or Connection TypeG
Flow Factor Kv1.9m³/h