Burkert Solenoid Valve 93970149, 2 port , NC, 24 V dc, 1in

  • RS Stock No. 816-3281
  • Mfr. Part No. 221998
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

DS6281-EV 2/2 Solenoid Valve - Stainless Steel

A 2 way servo assisted solenoid valves suitable for use with neutral fluids such as compressed air and water. N/C (Normally Closed) and N/O (Normally Open) versions available with NBR (Nitrile Rubber) or FKM (Fluroelastomer) seals. Usable for a variety of applications including heating and refrigeration, water treatment, compressed air and vacuum systems
ATEX approved versions available.

0.1 - 4 second response time (dependant upon pressure)
IP65 Rated (with cable protection)
Stainless steel body
Quiet operation
Water hammer free design
Compact installation length
NPT / Rc connection ports
0.2 - 16 Bar pressure range

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Pilot
Connection 1 in G
Connection Size 1in
Default Valve Position NC
Suitable Applications Hot Air, Pre-Solution
Type 2/2
Orifice Diameter 25mm
Body Material Stainless Steel
Maximum Working Pressure 16 bar
Operating Temperature Range 0 → +120 °C
Minimum Operating Temperature 0°C
Maximum Operating Temperature +120°C
Servo Assist Yes
Series 6281 EV Standard
Flow Factor Kv 12m³/h
Thread Standard or Connection Type G
Maximum Closing Time 0.1 → 4s
Connection Gender Female
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 750.87
(exc. GST)
$ 863.50
(inc. GST)
Per unit
1 +
Related Products
Two-way, pilot operated solenoid valves, minimum operating pressure ...
Two-way, pilot operated solenoid valves, minimum operating pressure required, normally closed with threaded port connection. Brass body. Minimum operating pressure required. Compact & lightweightDIN plug connection Ranging from -20 to +85°CCan be mounted in any position.
Diaphragm valves for partially aggressive gaseous and liquid ...
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Parker 2-way solenoid valves are used in a ...
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...
The Burkert 0290 series 1in G female solenoid ...
The Burkert 0290 series 1in G female solenoid valve has a supply voltage rating of 24VAC/VDC. This 2-port NC position valve is a vibration-proof, block screwed coil system with a damped design for quiet closing. This valve opens without differential ...