Asco Solenoid Valve E262K184S1N01F8, 2 port , NC, 230 V ac, 1/4in

  • RS Stock No. 869-2238
  • Mfr. Part No. E262K184S1N01F8
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PL
Product Details

Two-way, Direct Operated, High Pressure, N/C Valves

Direct operated solenoid valves with a stainless steel or brass body and NBR rubber seals. Fitted with a manual override and suitable for use with air, inert gases oil and water. ASCO's 262 series process valves are ROHs compliant and do not require a minimum pressure to operate. Coils can easily be changed between AC and DC. Available normally open or normally closed.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Oil, Water
Type 2/2
Orifice Diameter 3.2mm
Body Material Stainless Steel
Maximum Working Pressure 6.5 (Oil) bar, 7 (Water) bar, 7.5 (Air) bar
Operating Temperature Range -25 → +80 °C
Minimum Operating Temperature -25°C
Maximum Operating Temperature +80°C
Maximum Opening Time 25ms
Thread Standard or Connection Type G
Series E262K
Connection Gender Female
Flow Factor Kv 0.3m³/h
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 258.84
(exc. GST)
$ 297.67
(inc. GST)
units
Per unit
1 - 4
$258.84
5 - 9
$243.54
10 +
$241.01
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments. Duty cycle intermittent operation 40% 30 min8W nominal coil power. Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments. Duty cycle intermittent operation 40% 30 min8W nominal coil power. Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Two-way, normally closed, condensate drain valve assembly with ...
Description:
Two-way, normally closed, condensate drain valve assembly with electronic timer. Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods. Timer designed for automatic control of condensate draining ...
The direct-acting 2/2-way, normally closed type 6013Ex solenoid ...
Description:
The direct-acting 2/2-way, normally closed type 6013Ex solenoid valve is suitable for use with neutral and aggressive gases and fluids, for example: compressed air, town and natural gas, water, and hydraulic oil, in filling, dosing, and batching applications. The coil ...