Sensata / Crydom 50 A Solid State Relay, DC, Chassis Mount, 530 V rms Maximum Load

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

MCPC - Phase Angle Controller

Phase angle controller/SSR in one package. Ideal for any soft start / stop application requiring load control at multiple power levels for example heating elements, lamp brightness or motor speed (e.g. of a fan). The custom MCS / PC SSR provides the same ramp function as the standard MCS series, but an additional phase control function was added to the relay. The customer can therefore specify the amount of power they want applied to the load, then gradually ramp to that setting. If the power level is adjusted during operation, the relay will then gradually ramp to that new setting.

Provides a portion of each AC sine wave to control the amount of power delivered to an electrical load, with the percentage of power delivered determined by the input value
Reduced wiring and components in the panel saves time, cost and space
0 - 100% control range
Output status LED (Load Open, No Voltage)
Separate Output Enable/Disable control
SCR output

Note

Heat sink not included. For load current de-rating and heat sink details see manufacturers datasheet

Proportional and Power

Note

Temperature can affect current rating; please consult the data sheet for potential derating.

Specifications
Attribute Value
Minimum Load Current 150 mA
Maximum Load Current 50 A
Mounting Type Panel Mount
Minimum Load Voltage 330 V rms
Maximum Load Voltage 530 V rms
Minimum Control Voltage 8 V dc
Maximum Control Voltage 32 V dc
Switching Type DC
Terminal Type Screw
Dimensions 45.7 x 58.4 x 19.8mm
Maximum Operating Temperature +80°C
Operating Temperature Range -20 → +80°C
Length 45.7mm
Height 19.8mm
Minimum Operating Temperature -20°C
Load Voltage Range 330 → 530Vrms
Control Voltage Range 8 → 32 V dc
Depth 58.4mm
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 197.02
(exc. GST)
$ 226.57
(inc. GST)
units
Per unit
1 - 5
$197.02
6 - 11
$192.81
12 +
$191.33
Related Products
KSI series single phase solid state relay use ...
Description:
KSI series single phase solid state relay use the Triac or SCR output. It is widely used in various industry applications, and it can be used for the resistive, inductive or capacitive loads. The control voltage is 4-32VDC or 90-280VAC, ...
Synchronous solid state relay suited to most loads.TMS2 ...
Description:
Synchronous solid state relay suited to most loads.TMS2 technology thyristor output ensures longevity.Voltage protection for input as well as output (VDR) for very high immunity to interference.Wide control range: 20 → 265 Vac / dc with regulated control current.Green LED ...
MOSFET technology solid state relays for switching on ...
Description:
MOSFET technology solid state relays for switching on continuous voltage.Very low on-state resistance.Very low control consumption.No conducted or radiated interference.Control input protected against reverse polarity.Protection index: IP20.
Solid state relays with bi-polar transistor output. Ratings ...
Description:
Solid state relays with bi-polar transistor output. Ratings of 7A at 60 VdcAC or DC control voltage. Panel mount relay package. Screws and Saddle Clamps to allow electrical connection4000 Vrms isolation voltage. Operation temperature of -30 → +80 °CThermally conductive ...