ETA 20 A Solid State Relay, MOSFET, 32 V dc Maximum Load

  • RS Stock No. 729-2925
  • Mfr. Part No. E-1048-8I4-C3D4V1-4U3-20A
  • Manufacturer ETA
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Smart Power Relay E-1048-8I Series

The Smart Power Relay E-1048-8I is a remotely controllable electronic load disconnecting relay with three functions in a single unit:
- electronic relay
- electronic overcurrent prodection
- status indication
The 7-pin INLINE version is designed for use with various E-T-A terminal blocks, e. g. 17-P10-Si
Integral power electronics provide a wear-resistant switching function, insensitive to shock and vibration
Only a fraction of the control power needed by electro-mechanical relays is required for switching loads. This is important for battery buffered load circuits which have to remain controlled even with the generator off line
The extremely low induced current consumption of less than 1mA is absolutely necessary for battery buffered applications
The load circuit is disconnected in the event of an overload or short circuit, the trip curve is also suitable for smaller motor loads
The load circuit is permanently monitored for wire breakage
Two status outputs for control signal AS and group signal SF provide status indication
For processing the actual value of the current flow in a power management system an analogue output from 0 to 5 Volts is provided
Typical applications with DC 12V or DC 24V circuits, where magnetic valves, motors or lamp loads have to be
switched, protected or monitored

Approvals

CE, e1 logo (according to EU, EMC and automotive directives).

Approvals

CE, e1 logo

Specifications
Attribute Value
Maximum Load Current 20 A
Minimum Load Voltage 9 V dc
Maximum Load Voltage 32 V dc
Minimum Control Voltage 0 V dc
Maximum Control Voltage 5 V dc
Terminal Type Through Hole
Output Device MOSFET
Dimensions 50 x 11.5 x 56mm
Depth 11.5mm
Maximum Operating Temperature +85°C
Control Voltage Range 0 → 5 V dc
Operating Temperature Range -40 → +85°C
Load Voltage Range 9 → 32V dc
Off State Leakage Current 500 μA
Length 50mm
Minimum Operating Temperature -40°C
Height 56mm
11 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 360.48
(exc. GST)
$ 414.55
(inc. GST)
units
Per unit
1 - 4
$360.48
5 - 9
$354.16
10 - 24
$347.63
25 - 49
$340.88
50 +
$334.89
Related Products
High package density. Compatible with 5, 12 & ...
Description:
High package density. Compatible with 5, 12 & 24V logic systems. Isolation voltage 4000Vrms. Dimensions: H31.75mm x W10.2mm x D43.1mm. Operating temperature range: -40 to +80°C.
Crydom’s CZT products are technology proven AC output ...
Description:
Crydom’s CZT products are technology proven AC output solid state relays and contactors in the 3 main types of mounting packages: DIN Rail Mount, Panel Mount and PCB Mount. These relays offer a broad range of power ratings which makes ...
Electronic interface relays replace an entire reversing contactor ...
Description:
Electronic interface relays replace an entire reversing contactor circuit - including control input and load wiring lock mechanism. Contactless switching in the voltage zero point does not generate additional high-frequency interfering pulses. Input and load end suppressors permit permanently reliable ...
Electronic interface relays replace an entire reversing contactor ...
Description:
Electronic interface relays replace an entire reversing contactor circuit - including control input and load wiring lock mechanism. Contactless switching in the voltage zero point does not generate additional high-frequency interfering pulses. Input and load end suppressors permit permanently reliable ...