Radial spherical plain bearing 30mm id 5

  • RS Stock No. 191-3878
  • Mfr. Part No. GE30-PB
  • Manufacturer INA
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required

Specifications
Attribute Value
Bore Size 30mm
Outside Diameter 55mm
Static Radial Load Rating 159000N
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 264.09
(exc. GST)
$ 303.70
(inc. GST)
units
Per unit
1 - 4
$264.09
5 - 9
$256.69
10 - 24
$252.95
25 +
$249.17
Related Products
INA from Schaeffler radial insert ball bearings with ...
Description:
INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical ...
A range of ball bearings which are fitted ...
Description:
A range of ball bearings which are fitted with two synthetic rubber seals to prevent leakage of lubricant as well as entry of dust, water and other harmful material. Accepts radial and axial loads2RS denotes bearing fitted with 2 synthetic ...
A range of RS Pro common metric ball ...
Description:
A range of RS Pro common metric ball bearings, fitted with two synthetic rubber seals to prevent ingress of dirt and foreign matter. Primarily intended for use where the inner ring rotates. • Miniature • Sealed• Versatile.
Aluminium housing (8 and 10mm ID), anodised aluminium ...
Description:
Aluminium housing (8 and 10mm ID), anodised aluminium housing 12mm - 30mm. Liner JUM-01 as standard. Recommended tolerance for shaft: h6 - h10.