McLennan Servo Supplies MSE570 EVO 2 Stepper Motor Controller 3.5 A, 15 → 48V dc, 160 x 100 x 35.5mm

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Slimline Bipolar Stepper Motor Drive

Drives motors up to 40V at 3.5A
Adjustable drive current settings from 0.5 to 3.5A
Output overload protection
Synchronisation output for multi-axis systems
Full and half step drive modes
TTL & CMOS compatible control interface
Output disable input
5 & 12Vdc auxiliary outputs for external device energisation
Status LED's for condition monitoring
Provision for assembling on-board oscillator with ramp, low and high speed ranges
Single rail power supply for both motor drive and logic supplies

Note

Suitable for use with motors: stock nos. 432-8273, 440-442, 440-464, 440-470, 191-8328, 191-8362, 191-8378, 191-8384, 340-3711, 340-3727 and 340-3733

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 3.5 A
Board Supply Voltage 15 → 48V dc
Overall Length 160mm
Overall Width 100mm
Overall Depth 35.5mm
17 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 439.27
(exc. GST)
$ 505.16
(inc. GST)
units
Per unit
1 +
$439.27
Related Products
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protectionPanelmountingCut out 68x68 mmFor use ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadratureAnalogue velocity (oscillator) modeHost commands (SCL compatible)SiNet hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadratureHost control modeIdle current reductionAnti-resonanceTorque ripple smoothingMicrostep ...
Sanyo Denki Sanmotion driver provides the user with ...
Description:
Sanyo Denki Sanmotion driver provides the user with a simple to run driver with a comprehesive amount of applications. Available in Bipolar (829-3553) & Unipolar (829-3556) optionsCan be set to various preset values for quick installationLow vibration mode provices the ...