McLennan Servo Supplies PM546 Stepper Motor Controller 6 A, 24 → 85V dc, 228 x 100 x 34mm

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Bipolar Stepper Drive

Drives motors up to 85V and 6A/phase
On board output drive current setting (2.5 to 6.0A)
High efficiency chopped constant current power stage provides increased performance and reduced current consumption
Single supply rail simplifies power supply requirements
Short-circuit and open circuit protected stage for increased reliability
Selectable full or half step phase logic
Over temperature monitor with selectable automatic drive shutdown
Opto-isolated control inputs
Control from external clock and direction signals

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 6 A
Board Supply Voltage 24 → 85V dc
Overall Length 228mm
Overall Width 100mm
Overall Depth 34mm
On back order for despatch 30/07/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 1,137.84
(exc. GST)
$ 1,308.52
(inc. GST)
units
Per unit
1 +
$1,137.84
Related Products
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature. Host control mode. Idle current reduction. Anti-resonance. Torque ripple smoothing. ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadrature. Analogue velocity (oscillator) mode. Host commands (SCL compatible)Si. Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection. Synchronisation output for multi-axis systems. Full and half step drive modesTTL & CMOS compatible control interface. Output disable input5 & 12Vdc auxiliary outputs for ...
Sanyo Denki Sanmotion driver provides the user with ...
Description:
Sanyo Denki Sanmotion driver provides the user with a simple to run driver with a comprehesive amount of applications. Available in Bipolar (829-3553) & Unipolar (829-3556) options. Can be set to various preset values for quick installation. Low vibration mode ...