Geckodrive G201X Stepper Motor Controller 7 A, 18 → 80V dc, 2.5 x 0.83 x 2.58in

  • RS Stock No. 793-4127
  • Mfr. Part No. G201X
  • Manufacturer Geckodrive
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

G201X - Step Motor Drive

The G201X is a stepper motor drive with an aluminium case. Drives stepper motors up to 7 Amps.

STEP and DIRECTION inputs are +3.3/5 VDC compatible
Recirculate mode during STANDBY greatly reduces motor heating while stopped
Power-on RESET
Direction is clocked in on the active step pulse edge
DIP switch settings for current and motor version
Needs heatsinking for current settings greater than 3 amps
Low motor heating while stopped
Power supply voltage between 18 and 80 VDC
Aluminium cover and plate
Connector type is Modular, 5mm pitch

Specifications
Attribute Value
For Motor Type Stepper Motor
Current Rating 7 A
Voltage Rating 80 V dc
Board Supply Voltage 18 → 80V dc
Overall Length 2.5in
Overall Width 0.83in
Overall Depth 2.58in
54 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
Was $338.75
$ 335.70
(exc. GST)
$ 386.06
(inc. GST)
units
Per unit
1 +
$335.70
Related Products
Travel distances, positions, speeds, operating times - easily ...
Description:
Travel distances, positions, speeds, operating times - easily defined with the new web-based control system for drylin® E linear systems from igus®. No software or app installation necessary, fast commissioning. Control possible via smartphone (browser), tablet or laptop. Simple and ...
Professional range of Connection Modules & Communication Interface ...
Description:
Professional range of Connection Modules & Communication Interface for LEXIUM32I Series with STO (Safe Torque Off) Integrated safety Function. Options available for CANopen / CANmotion & EtherCAT Bus. Connection Module & Communication Interface via industrial connectors. Supports M8 & M12 ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadrature. Analogue velocity (oscillator) mode. Host commands (SCL compatible)Si. Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature. Host control mode. Idle current reduction. Anti-resonance. Torque ripple smoothing. ...