Geckodrive G540 Stepper Motor Controller 3.5 A, 18 → 50V dc, 161.8 x 60.2 x 31.75mm

  • RS Stock No. 896-8566
  • Mfr. Part No. G540
  • Manufacturer Geckodrive
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

G540 - Step Motor Drive 4-Axis

The G540 is a complete 4-axis system which plugs directly into a computer via the parallel port and to stepper motors through DB9 connectors.
It contains four G250 drives, a breakout board and a hard anodized aluminum case.


Stepper Motor Drive with 4-axis
Input frequency till 200kHz
Temperature range 0 to 70 °C

Note

The 4-axix drive contains the G250 stepper drive boards, stock no. 896-8553

Specifications
Attribute Value
For Motor Type Stepper Motor
Current Rating 3.5 A
Voltage Rating 50 V dc
Board Supply Voltage 18 → 50V dc
Motor Supply Voltage 50V dc
Overall Length 161.8mm
Overall Width 60.2mm
Overall Depth 31.75mm
On back order for despatch 12/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 1,049.66
(exc. GST)
$ 1,207.11
(inc. GST)
units
Per unit
1 +
$1,049.66
Related Products
Simple manual control provides:. Bi-directional single step (jog) ...
Description:
Simple manual control provides:. Bi-directional single step (jog) Slow speed continuous operation in desired direction Fast speed, continuous operation in desired direction. The fast positioning rates are programmable to meet the user’s exact requirements. For 2 axis installation a Jog ...
Professional range of Connection Modules & Communication Interface ...
Description:
Professional range of Connection Modules & Communication Interface for LEXIUM32I Series with STO (Safe Torque Off) Integrated safety Function. Options available for CANopen / CANmotion & EtherCAT Bus. Connection Module & Communication Interface via industrial connectors. Supports M8 & M12 ...
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature. Host control mode. Idle current reduction. Anti-resonance. Torque ripple smoothing. ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadrature. Analogue velocity (oscillator) mode. Host commands (SCL compatible)Si. Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).