Murata Power Solutions Non-Isolated DC-DC Converter, 5V dc Output, 1.5A

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Murata Power Solutions Non-Isolated DC-DC Converter

The Murata Power Solutions Non-Isolated DC-DC converter is used for the embedded application. It has three nominal output voltage terminals and up to 1.5A is the maximum output. The ultra-wide input range of upto 12VDC. Based on fixed frequency the high efficiency means very low heat and low electrical noise requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators hence no extra outside component is required

Features and Benefits

• High efficiency with no external components
• No heat sink direct replacement for 3-terminal
• Operating temperature is from -40°Cto 85°C
• Outstanding thermal derating performance
• Short circuit protection
• Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications

• Control boxes
• Control boxes
• ITE commercials
• ITE commercials

Certifications

• UL certified

Specifications
Attribute Value
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package SIP
Minimum Temperature -40°C
Maximum Temperature +85°C
Load Regulation ±0.25%
Line Regulation ±0.25%
Ripple And Noise 75mV Pk-Pk
Weight 2g
Depth 7.6mm
Series OKI-78SR
Width 16.5mm
Length 10.4mm
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) 1 Tray of 360
$ 2,781.72
(exc. GST)
$ 3,198.98
(inc. GST)
Tray(s)
Per Tray
Per unit*
1 +
$2,781.72
$7.727
*price indicative
Related Products
The Murata CRE series is a cost effective ...
Description:
The Murata CRE series is a cost effective isolated DC-DC converter series, constructed within an industry standard package & pinout. The CRE series is a great choice for integration into a wide variety of applications thanks to the standard pinouts ...
Murata CRL series of DC-DC converters are well ...
Description:
Murata CRL series of DC-DC converters are well suited to isolaton and/or DC power conversions within DC power rail applications. The series can provide a solution to negative rail installations where only positive rails exists, thanks to the series utilising ...
Low profile 0.43" industry standard quarter-brick package/pinout2k. Vdc ...
Description:
Low profile 0.43" industry standard quarter-brick package/pinout2k. Vdc isolation minimum4:1 input voltage range. On/off control, trim & sense functions. Output overvoltage protection. Fully I/O and thermal shutdown protected.
Twin independent outputs1kV input/output isolation. High efficiency. Unregulated ...
Description:
Twin independent outputs1kV input/output isolation. High efficiency. Unregulated output. No external components required. Internal SMD constructionSIP7 plastic packageUL 94V-0 package material.