Altecnic Brass Thermostatic Washroom Valve, 22mm Compression

  • RS Stock No. 777-0361
  • Mfr. Part No. CA-RS/100TBA
  • Manufacturer Altecnic
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Altecnic Mechant Thermostatic Mixing Valves

Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The failsafe design shuts off the mixed water flow automatically in the event of disruption in the hot or cold water supply to the valve

Max. working pressure: 10 bar - Static
Min. working temperature 0.2 Bar : Dynamic
Max. inlet temperature: 85°C
Inlet temperature range - hot supply: 52 - 65°C
- cold supply: 0.5 - 20°C
D08 working pressure - low pressure: 0.2 - 1.0
- high pressure: 1.0 - 5.0
Max. inlet pressure ratio (H/C or C/H): 5:1
Accuracy: ±2°C
Setting Range: 30 to 50°C
Body DZR - chrome plated: BS EN 12165 CW602N
Springs: Stainless steel
Seals: EPDM

Note

The merchant range of fail safe thermostatic mixing valves have been designed and manufactured to meet the requirements of BS 7942:2000 and the National Health Service model engineering specification D08 for use in healthcare premises, hospitals, care homes, and schools.

Standards

BS EN 1111: 1999 and BS EN 1287: 1999 and the TMV2 Type Scheme

Basin, Bath & Shower Valves

A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

Specifications
Attribute Value
Connection Compression
Body Material Brass
Maximum Working Pressure 10 bar
Connection Size 22mm
Maximum Set Temperature +50°C
Minimum Set Temperature +30°C
Thread Standard or Connection Type Compression
Temperature Setting Range +30 → +50 °C
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 162.47
(exc. GST)
$ 186.84
(inc. GST)
units
Per unit
1 - 4
$162.47
5 +
$158.40
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals. Creep resistant bearings. Reinforced nylon handle. Reduced risk of contamination by top and bottom seals. Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar. Polished disc.
Application : Industry, pneumatics, hydraulic, plumbing installations. Operating ...
Description:
Application : Industry, pneumatics, hydraulic, plumbing installations. Operating Temperature : -20゚C / +100゚C Operating pressure : see non-shock cold working pressure chart on data sheet. Threads : ISO 228 parallel female by female threads Stem : NylonNBR 65 SH/PS seal ...
For heating, sanitary and compressed air systems, pumps ...
Description:
For heating, sanitary and compressed air systems, pumps and autoclaves. Body in hot forged DZR brass. Threading to BS2779Hostaform inner valve. Spring in 18//8 AISI 302-304 stainless steel. Hydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow ...
Applications: Steam. Min. Set pressure 0.2 barg. Overpressure ...
Description:
Applications: Steam. Min. Set pressure 0.2 barg. Overpressure 10%Blowdown Gases 10%, liquids 20%Connections: Threaded BSP / NPTDischarge coefficients k= 0.55 for gases, k= 0.48 for liquids. Design EN-12516-1, EN-4126-1/7DIN 259 and ANSI B2.1Rating PN-40Material Stainless steel 316LMaterials ENTemperature range -10 ...