Camloc by Alcoa Thread Repair Insert, M10 x 1.5, Drill Size 11.5mm

  • RS Stock No. 668-4679
  • Mfr. Part No. KNM10X1.5
  • Manufacturer Keenserts
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specifications
Attribute Value
Thread Size M10 x 1.5
Drill Size 11.5mm
131 In stock for delivery within 5 working day(s)
Price (ex. GST) 1 Bag of 3
$ 50.04
(exc. GST)
$ 57.55
(inc. GST)
Bag(s)
Per Bag
Per unit*
1 +
$50.04
$16.68
*price indicative
Related Products
Professional quality replaceable carbide heads for use with ...
Description:
Professional quality replaceable carbide heads for use with Dormers H853 and H855 Hydra range of drill bodies. Ti-phon coated for increased strength and reduced build up when drilling softer materials and excellent, consistent performance in harder materials such as stainless ...
18V ergonomically designed Lithium Ion hammer drill. Compact ...
Description:
18V ergonomically designed Lithium Ion hammer drill. Compact and lightweight design is ideal for use in confined spaces. 2 speed metal transmission14 position adjustable torque 13mm single sleeve keyless chuck. Automatic spindle lock enables fast bit changes. Easy one handed ...
HSCo-XP standard length flatted shank 2 flute slot ...
Description:
HSCo-XP standard length flatted shank 2 flute slot drill for milling keyways and slots in most materials. Manufactured from Powder Metallurgy Cobalt Steel for increased tool life and wear resistance. Superior edge strength and rigidity resulting in improved surface finish ...
HELICOIL® plus spare metric threaded inserts. ...
Description:
HELICOIL® plus spare metric threaded inserts.