United Automation, STOM-1, Thyristor Trigger Module, 18V ac, 93 x 62 x 44mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Phase Angle & Burst Firing Single-Phase, STOM-1

A solid state, microprocessor based device incorporating both Phase Angle and Burst Firing modes of power control (selectable).

Capable of controlling loads up to 25A at voltages up to 415 Vac
Can also be used for soft starting in Phase Angle and will automatically switch to Burst Firing at a preset signal level, remaining there even if the signal falls below preset level
18 Vac supply
0 to 30s adjustable ramp-up from cold
Control input 0 to 5V or 4-20mA current loop
Can be controlled by a temperature controller or PC

Note

Mount on an adequate heat sink (heat sink compound stock no. 554-311 recommended). To comply with BSEN55014 in Phase Angle mode, a line filter should be used.

//media.rs-online.com/t_line/L195352-01.gif

The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.

Specifications
Attribute Value
Input Voltage AC 18V ac
Output Isolation 3500V
Mounting Type Screw Mount
Dimensions 93 x 62 x 44mm
Length 93mm
Height 44mm
Maximum Input Logic Voltage 440V
Width 62mm
Maximum Operating Temperature +65 °C
Minimum Input Logic Voltage 5V
Minimum Operating Temperature 0 °C
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 177.57
(exc. GST)
$ 204.21
(inc. GST)
units
Per unit
1 - 9
$177.57
10 - 49
$175.79
50 - 99
$174.04
100 - 249
$172.29
250 +
$170.57
Related Products
Switch mode Euro-modular power supplies for use in ...
Description:
Switch mode Euro-modular power supplies for use in 19in subracks to DIN 41494Switchable input Voltage. In-built EMI filter to VDE level BAdjustable output voltage ±10%Short circuit protection. Overvoltage protection.
SCR trigger modules for use in zero voltage ...
Description:
SCR trigger modules for use in zero voltage (SKPC 100Z), or instantaneous (SKPC 100) applications. Uses a hard firing technique to eliminate the need for an external transformer. Triggers SCRs in dc bridge configurations. Polarised Faston connectors. Mounting centres identical ...
Variable, manually controlled, phase angle regulator for use ...
Description:
Variable, manually controlled, phase angle regulator for use with direct or transformer coupled, single phase loads. Mounted on integral heat sink. Reversible base allows surface/panel mounting. Large Triac handles high inrush currents. Suitable for use with conventional heaters, quartz or ...
Phase angle trigger module for resistive & inductive ...
Description:
Phase angle trigger module for resistive & inductive loads. The MONO-LINK firing system is ideal for use with inductive loads via triac or thyristor on single phase-to-neutral, phase-to-phase supplies. Remote power transformer for increased reliability and wide operational voltage capacityMONO-LINK® ...