United Automation, A34462, Thyristor Trigger Module, 440V ac, 203 x 108 x 40mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Dual Mode Firing Circuit & Power Module, FC36MV (400V)

A three phase microprocessor based firing circuit is a populated printed circuit board primarily designed for incorporating into three phase power control assemblies for the control of thyristors (SCR’s). The unit is available in various supply voltage capabilities. Phase wiring installation is kept to a minimum, with simple gate/cathode outputs and no necessity for external phasing supply transformers.

Auto Phase Rotation correction & Phase-Loss detection
Switch selectable phasing reversal
Control type: Phase angle, Burst fire, or Phase angle and Burst fire combination
Analogue or digital input signal control options (opto isolated)
Load type selection switch, for resistive or inductive applications
Output status LED indication
Current limit facility, switch selectable with LED indication
Over current latching trip to 120% of maximum, with LED indication
Adjustable ramp control 0 to 30 seconds
Applications are universally acceptable for AC, DC, resistive or most inductive loads via thyristor pairs on three phase assemblies
SCR Power handling gives smooth proportional control to all types of industrial processes which includes furnaces, electroplating, controlled rectifiers and transformers

The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.

Specifications
Attribute Value
Input Voltage AC 440V ac
Output Isolation 3500Vrms
Mounting Type Screw Mount
Dimensions 203 x 108 x 40mm
Length 203mm
Height 40mm
Maximum Input Logic Voltage 24V dc
Width 108mm
Maximum Operating Temperature +65 °C
Minimum Input Logic Voltage 5V dc
Minimum Operating Temperature 0 °C
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 1,032.54
(exc. GST)
$ 1,187.42
(inc. GST)
units
Per unit
1 - 9
$1,032.54
10 - 49
$970.15
50 - 99
$926.81
100 - 249
$868.34
250 +
$857.74
Related Products
The BA9034N incorporates automatic standstill monitoring alongside a ...
Description:
The BA9034N incorporates automatic standstill monitoring alongside a contactor connected to the DC relay output. Motor restart while DC braking current injection can be avoided thanks to an inter-lock contact & built in safety brake. Asynchronous motor brake relays are ...
The Bridge Rectifier converts an Alternating Current (AC) ...
Description:
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement ...
Dual IGBT Modules from Semikron in modern low-profile ...
Description:
Dual IGBT Modules from Semikron in modern low-profile SEMiX® packages suitable for half-bridge power control applications. The modules use solder-free spring or press-fit contacts to allow for a gate driver mounted directly on top of the module, saving space and ...
Variable, manually controlled, phase angle regulator for use ...
Description:
Variable, manually controlled, phase angle regulator for use with direct or transformer coupled, single phase loads. Mounted on integral heat sink. Reversible base allows surface/panel mounting. Large Triac handles high inrush currents. Suitable for use with conventional heaters, quartz or ...