FTDI Chip FT601Q-B-T, USB Bridge IC, USB 2.0, USB 3.0 2-Port at 480 (USB 2.0) Mbit/s, 5 (USB 3.0) Gbit/s, 3.3 V dc,

  • RS Stock No. 146-6836
  • Mfr. Part No. FT601Q-B-T
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Enabling faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.

16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.

Specifications
Attribute Value
Number of Transceivers 2
Data Rate 5 (USB 3.0) Gbit/s, 480 (USB 2.0) Mbit/s
Protocols Supported USB 2.0, USB 3.0
Power Supply Type Single
ESD Protection Yes
Typical Single Supply Voltage 3.3 V dc
Mounting Type Surface Mount
Package Type QFN
Pin Count 76
Dimensions 9.1 x 9.1 x 0.95mm
Height 0.95mm
Length 9.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 9.1mm
On back order for despatch 11/11/2020, delivery within 7 working days from despatch date.
Price (ex. GST) Each (In a Tray of 260)
$ 13.442
(exc. GST)
$ 15.458
(inc. GST)
units
Per unit
Per Tray*
260 +
$13.442
$3,494.92
*price indicative
Related Products
The TTL-234X-3V3-2mm cable is terminated by an 8 ...
Description:
The TTL-234X-3V3-2mm cable is terminated by an 8 way, 2mm pitch, Single-In-Line (SIL) keyed connector. The TTL-234X-3V3-2mm operates at +3.3V levels (signals only, VCC=+5V). These cables are primarily intended for interfacing the FTDI VDRIVE2 and VMUSIC2 modules. Note that when ...
Designed to replace an existing DE9 connector, (male ...
Description:
Designed to replace an existing DE9 connector, (male or female) RS-232/TTL UART connection with a drop-in USB replacement connection. Miniaturised modules which closely resemble a DE9 connector for PCB mountingUSB mini-B socket connector. The modules contain a USB-Serial bridge IC ...
The FTDI Chip FT232R is a USB to ...
Description:
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in ...
The FTDI Chip FT230X and FT234XD are Ful ...
Description:
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.They have a fully integrated MTP memory and an integrated clock circuit which ...