Monitran Mounting Adaptor

  • RS Stock No. 533-2273
  • Mfr. Part No. MTN/MS002
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN1185 Series 4-20mA Accelerometer

Used for air handling units, building services, fans
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

15 : Next working day
68 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 21.81
(exc. GST)
$ 25.08
(inc. GST)
units
Per unit
1 - 9
$21.81
10 - 49
$20.99
50 +
$20.49
Related Products
The acceleration sensors are manufactured on the basis ...
Description:
The acceleration sensors are manufactured on the basis of MEMS-based differential capacitors and are equally suitable for measuring acceleration, vibration and inclination. The sensor is characterised by a long service life, minimal drifts and great long-term stability. The special housing ...
The range of shock sensors from Murata are ...
Description:
The range of shock sensors from Murata are designed for high performance acceleration sensors for vibration and mechanical shock. They are designed for a wide range of applications including; consumer equipment, healthcare, security, tyre pressure monitoring and industrial automation.
Glass and metal bodied versions offer bounce-free switching ...
Description:
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch ...
Normally open contact acceleration switches used to detect ...
Description:
Normally open contact acceleration switches used to detect sudden changes in velocitySteel gold plated caseChoice of activation levels: 2G (455-3665), 5G (289-7935), 10G (455-3643)Dimensions: Length 18mm (inc. pins) Body Dia. 4.6mm.