Monitran Vibration Sensor 8 mA -10°C → +140°C, Dimensions 50 x 19 x 19 mm

  • RS Stock No. 533-2302
  • Mfr. Part No. MTN/1830SM8
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN/1830SM8 Mini Low Profile with M8 Mount

Used for machine tools and Paper Machinery
100mV/g +/-10% Nominal at 80Hz
Frequency from 2Hz to 9KHz
Bias voltage nominal 12Vdc
Electrical noise 0.1 mg max
5 meter PTFE Cable - stainless steel over braided
M8 x 25 mm mounting bolt
IP 67 Stainless Steel body Case
Dimensions (LxWxH): 50x19x19mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifications
Attribute Value
Maximum Current 8 mA
Minimum Operating Temperature -10°C
Maximum Operating Temperature +140°C
Dimensions 50 x 19 x 19 mm
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 584.07
(exc. GST)
$ 671.68
(inc. GST)
units
Per unit
1 - 5
$584.07
6 +
$567.40
Related Products
A range of inductive cylindrical sensors that are ...
Description:
A range of inductive cylindrical sensors that are ATEX approved so can be used in hazardous areas and potentially explosive atmospheres. ATEX approved, suitable for hazardous areas. Shielded or unshielded versions. Housing material: nickel plated brass or stainless steel.
High quality, low cost, non-contact Infra-red temperature sensors ...
Description:
High quality, low cost, non-contact Infra-red temperature sensors suitable for measuring the temperature of inaccessible or moving objects and materials. Fast response with high stability Types available with air/water cooled housings Quick and easy to install Available as either two-wire ...
Screw-in resistance thermometer. Temperature measurement and monitoring on ...
Description:
Screw-in resistance thermometer. Temperature measurement and monitoring on diverse application sites. Temperature range -50 °C → +200 °C or +400 °CAnti-kink spring. Stainless steel screw with connection lead. Two or three-conductor circuit. Accuracy class B2.5 m connection lead. Stainless steel ...
Fully adjustable low pressure switches suitable for a ...
Description:
Fully adjustable low pressure switches suitable for a wide range of industrial uses. Nylon 12 housing, neoprene diaphragm, stainless steel spring5 fixing holes on 28.5 pcd for No. 4 self-tapping screws.