Monitran Vibration Sensor 8 mA -25°C → +120°C, Dimensions 22 x 48 mm

  • RS Stock No. 533-2346
  • Mfr. Part No. MTN/1020
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN/1020 Mini Accelerometer with TNC Connector and A/C Output

Used for general industry, pumps, fans, air handling units, machine tools
100 mV/g ±10% Nominal at 80 Hz
Frequency from 2 Hz to 13 kHz
+/-80G Dynamic acceleration range
Bias voltage nominal 12Vdc
Electrical noise 0.1 mg max
TNC Connection
IP 65 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 19x40mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifications
Attribute Value
Maximum Current 8 mA
Minimum Operating Temperature -25°C
Maximum Operating Temperature +120°C
Dimensions 22 x 48 mm
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 421.26
(exc. GST)
$ 484.45
(inc. GST)
units
Per unit
1 - 5
$421.26
6 +
$409.03
Related Products
Extremely rugged and able to withstand temperatures up ...
Description:
Extremely rugged and able to withstand temperatures up to 500°CParticularly suitable for industrial applications including high pressure, high vacuum and vibration. The probes can be bent to enable fitting in awkward locationsPT100 class B, 4 wire. Stainless steel (316)Plain pot ...
Festo SMT/SME-8M Series T-Slot proximity sensors are fully ...
Description:
Festo SMT/SME-8M Series T-Slot proximity sensors are fully compatible with all Festo cylinders that have T-slots. The SME/SMT series provide a reliable sensing solution in a variety of switching options. Sturdy central mounting guarantees that the sensor is securely screwed ...
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...
The TE Connectivity MEAS Mini. Sense 100 series ...
Description:
The TE Connectivity MEAS Mini. Sense 100 series are economical, cantilever-type vibration sensors. Loaded by a mass, these sensors feature a high level of sensitivity at low frequencies and can be used in applications that detect impact or continuous vibration. ...