Monitran Vibration Sensor 20 mA -25°C → +90°C, Dimensions 27 x 43 mm

  • RS Stock No. 533-2374
  • Mfr. Part No. MTN/1185CQ-25
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN1185 Series 4-20mA Accelerometer

Used for air handling units, building services, fans
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifications
Attribute Value
Maximum Current 20 mA
Length 27mm
Width 27mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +90°C
Dimensions 27 x 43 mm
10 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 668.39
(exc. GST)
$ 768.65
(inc. GST)
units
Per unit
1 - 5
$668.39
6 +
$652.08
Related Products
Stainless steel smooth body with PBT sensing face. ...
Description:
Stainless steel smooth body with PBT sensing face. Ideal for applications where contamination may be a problem. LED indication Embeddable IP67 Operating temperature range -25 → +70°C EN60947-5-2 Short circuit and reverse polarity protection.
A range of inductive cylindrical sensors that are ...
Description:
A range of inductive cylindrical sensors that are ATEX approved so can be used in hazardous areas and potentially explosive atmospheres. ATEX approved, suitable for hazardous areas. Shielded or unshielded versions. Housing material: nickel plated brass or stainless steel.
RS Pro Pt100 multipurpose temeperature probes. A rigid ...
Description:
RS Pro Pt100 multipurpose temeperature probes. A rigid 316 stainless steel sheath in a wide variety probe diameters. PT100 class B4 Wire. Rigid Stainless steel probe. Teflon insulated flexible lead.
The RS PRO 2 wire resistance thermometer has ...
Description:
The RS PRO 2 wire resistance thermometer has a Pt100 type sensor. It has a ceramic probe of 25mm long probe and a diameter of 4mm. It has a class B tolerance sensor. The wire wound RTD is suitable for ...