Honeywell Vibration Sensor -55°C → +120°C, Dimensions 19.05 (Dia.) x 56.88 mm

  • RS Stock No. 822-8385
  • Mfr. Part No. 3010AN
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

Honeywell VRS Sensors

Honeywell offers VRS sensors for high output, general purpose, power output, high resolution, high temperature, and hazardous location applications. High Output VRS sensors are designed for use in applications where higher output voltages are needed. For best performance use in applications of low to medium speeds with medium to high impedance loads. General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation.

The fixed magnetic field is established by use of a permanent magnet. As a ferrous metal object approaches and passes near the sensing area the flux lines of the magnetic field change in strength. This change in magnetic field strength induces a current into a coil winding, which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage. One complete waveform occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope.

Self-powered operation
Direct conversion of actuator speed to output frequency
Simple installation
No moving parts
Designed for use over a wide range of speeds
Adaptable to a wide variety of configurations
Customized VRS products for unique speed sensing applications

Potential Applications:
Engine RPM measurement
Motor RPM measurement
Process speed measurement
Speed measurement of pumps, blowers, mixers, exhaust and ventilating fans
Flow measurement on turbine meters
Wheel-slip measurement on autos and locomotives
Gear speed measurement

Specifications
Attribute Value
Switching Frequency 50 kHz
Length 19.05 (Dia.)mm
Depth 56.88mm
Minimum Operating Temperature -55°C
Maximum Operating Temperature +120°C
Dimensions 19.05 (Dia.) x 56.88 mm
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 113.14
(exc. GST)
$ 130.11
(inc. GST)
units
Per unit
1 - 9
$113.14
10 - 24
$111.46
25 - 49
$109.83
50 - 99
$108.30
100 +
$106.81
Related Products
Connects to a network via USB or Bluetooth® ...
Description:
Connects to a network via USB or Bluetooth® to enable the sending of measurement dataUsing OMRON's unique and innovative algorithm, enables highly accurate determination of earthquakes based on vibrational accelerationEnables continuous monitoring of room air quality using a VOC sensor. ...
Balluff Micropulse magnetostrictive linear position transducers deliver highly ...
Description:
Balluff Micropulse magnetostrictive linear position transducers deliver highly accurate and reliable position control signals. Balluff’s non-contact magnetostrictive technology means performance does not reduce over time and have proven reliable in demanding industrial position monitoring and measurement ...
Glass and metal bodied versions offer bounce-free switching ...
Description:
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch ...
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in ...
Description:
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in attempts through prying, penetration, impact etc. using typical impact sound signalsPatented frequency analysis detects the difference between simple knocking, external vibrations and similar frequencies that typically occur during a ...