12 kW Water Heater with Incoloy Heating Element, Thermostat Included, 415 V ac

  • RS Stock No. 273-135
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Industrial Incoloy Sheathed Water Heaters | RS PRO |

Introducing the comprehensive range of industrial immersion heaters from RS PRO. These rod adjustable thermostats feature an Incoloy sheathed heating element perfect for hot water heating. These products work particularly well in heavy duty/hard or aggressive waters.

Features and benefits:

• Wired in single or 3 phase suitable for applications requiring either a single current or multiple.

• Control thermostat in the Incoloy 825 pocket, with all dual cut out heaters coming with a rod thermostat (supplied).

• Can be immersed in lengths up to 11 - 30 inches.

• BSP threaded brass head.

• Hoseproof polypropylene terminal enclosure which can be rotated in any position.

• Fitted with thermostat and jointing gasket.

Safety features:

• Dual cut-out.

• Separate secondary manual reset safety cut-out (alongside the dual cut-out) which is directly fitted to the actual immersion heater head.

Applications:

• Hot water heating.

FAQs

How do water heater elements work?

A water heating element is a pair of upper and lower heating elements that fit into a water heater of some sort. An electric current is passed through the elements which then heats the cold water.

What causes water heater elements to burn out?
Below are some causes:

  • Power surge - a sudden voltage increase to the element caused by a power surge can be enough to burn out an element.

  • Wires - a bad connection can cause an element to stop working.

  • Thermostat tripping out- these have a high limit switch that shuts off power to the elements when temperatures exceed normal.

  • Minerals - sediment collects at the bottom of the water heater tank, encasing the lower element. The element is forced to work harder, and will eventually fail.

  • Air pockets - these allow the upper element to burn while not immersed in water, resulting in failure.

Note

it is recommended that heaters over 3kW should be used on a 3 phase supply.

Specifications
Attribute Value
Tank Heater Type BSP Thread
Power Rating 12 kW
Heating Element Material Incoloy
Immersed Length 609mm
Thermostat Included Yes
Supply Voltage 415 V ac
20 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
$ 916.14
(exc. GST)
$ 1,053.56
(inc. GST)
units
Per unit
1 +
$916.14
Related Products
The ACIM Jouanin flat bracket 1kW strip heater ...
Description:
The ACIM Jouanin flat bracket 1kW strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C. Note:To obtain optimum performance from these ...
Sealed shielded clamps for heating cylindrical parts such ...
Description:
Sealed shielded clamps for heating cylindrical parts such as press nozzles for injecting thermoplastic materials or any other application requiring a perfect seal on resistance and electrical connection. Sealed brass band heater with folded ends. Silver solder seal. Band heater ...
The Acim Jouanin 500W cartridge heater has a ...
Description:
The Acim Jouanin 500W cartridge heater has a diameter of 10mm and length of 100mm. It provides localised heat to a restricted work area requiring close thermal control. The cartridge heater has low/moderate watt density elements consisting of helical wire ...
The Acim Jouanin 200W cartridge heater has a ...
Description:
The Acim Jouanin 200W cartridge heater has a diameter of 6.5mm and length of 80mm. It provides localised heat to a restricted work area requiring close thermal control. The cartridge heater has low/moderate watt density elements consisting of helical wire ...