Crimping Kits

Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.


The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.


How do crimp terminal kits work?


There are broadly three steps to using crimp terminal kits:

  1. Insert the desired terminal into the crimping tool
  2. Insert the wire into the terminal
  3. Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire

Types of crimp terminal


Crimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.


...
Read more Read less

Filters

Viewing 21 - 40 of 46 products
Results per page
Description Price Type Connector Type Kit Contents Contact Plating Contact Material
RS Stock No. 513-2556
BrandRS PRO
$31.60
Each
units
90 Piece Bootlace Ferrule 10 x 16 mm², 10 x 6 mm² Ferrules, 20 x 10 mm², 50 x 4 mm² - -
RS Stock No. 408-9697
Mfr. Part No.DS-MIXT-05-RSU
$203.55
Each
units
DuraSeal Service and Repair Heat Shrink Terminals and Splices 0 x Duraseal Splice, 10 x Durseal Spade, 25 x Durseal Receptacle, 100 x Durseal Ring Terminal - Copper
RS Stock No. 441-5535
Mfr. Part No.A801632T
$250.57
Each
units
- Insulated Terminal Cable Tie Tool, Cable Ties, Crimp Tool, Insulated Terminals - -
RS Stock No. 815-6710
Mfr. Part No.A8190227T
$283.93
1 Kit
Kit(s)
- Heat Shrink Terminals and Splices Crimp Tool, 225 Assorted Heat Shrink Terminals - Copper
RS Stock No. 374-4315
Mfr. Part No.H-BOX 4,0-16,0QMM DIN -9025400000
BrandWeidmuller
$74.33
Each
units
- Bootlace Ferrule 4mm² → 16mm² Wire End Ferrules - -
RS Stock No. 414-6835
Mfr. Part No.H-BOX 0,5-2,5QMM -9025900000
BrandWeidmuller
$62.57
Each
units
- Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS Stock No. 413-2662
Mfr. Part No.ST1B
BrandKlauke
$57.42
Each
units
- Bootlace Ferrule - - -
RS Stock No. 413-2678
Mfr. Part No.ST2B
BrandKlauke
$54.09
Each
units
- Bootlace Ferrule - - -
RS Stock No. 602-8149
Mfr. Part No.RS-KT-HO
BrandJST
$215.28
1 Kit
Kit(s)
- Ring Tongue Terminal R1.25-3.5, R1.25-4, R2-3.5, R2-4, R5.5-5, R5.5-6, R8-6, R8-8, 0.5-3 - -
RS Stock No. 602-8161
Mfr. Part No.RS-KT-ZO
BrandJST
$201.39
1 Kit
Kit(s)
- Insulated Ring Terminal RAV1.25-3.5, RAV1.25-4, RAV1.25-5, RAV2-3.5, RAV2-4, RAV2-5, RAV5.5-5, RAV5.5-6, V0.5-3 - -
RS Stock No. 413-2713
Mfr. Part No.ST15B
BrandKlauke
$48.00
Each
units
- Bootlace Ferrule - - -
RS Stock No. 602-8155
Mfr. Part No.RS-KT-HY
BrandJST
$246.35
1 Kit
Kit(s)
Spade Terminals Terminal 0.5-3A, 1.25-5A, 1.25-YS3A, 1.25-YS4A, 2-5A, 2-YS3A, 2-YS4A, 5.5-5A, 5.5-6A - -
RS Stock No. 414-6633
Mfr. Part No.725929
$493.17
Each
units
Automotive Service PIDG Splices/Terminals, Plasti-Grip Terminals Butt Splice, Electrotap, Female Bullet, Male Bullet, Male Receptacle, Piggyback, Pin, Receptacle, Ring, Superchamp II Tool - -
RS Stock No. 175-6754
Mfr. Part No.725972-0
$169.84
Each
units
Repair Insulated Terminal Butt Splice, Closed End Connector, Piggyback, Pin, Receptacle, Ring, Spade, Superchamp II Tool - -
RS Stock No. 220-6216
Mfr. Part No.06490820000
$59.60
Each
units
- Bootlace Ferrule Ferrules of 10 mm² x 20, Ferrules of 16 mm² x 10, Ferrules of 4 mm² x 50, Ferrules of 6 mm² x 20 - -
RS Stock No. 413-2690
Mfr. Part No.ST12B
BrandKlauke
$50.88
Each
units
- Bootlace Ferrule - - -
RS Stock No. 413-2707
Mfr. Part No.ST13B
BrandKlauke
$48.87
Each
units
- Bootlace Ferrule - - -
New
RS Stock No. 200-7032
Mfr. Part No.COF-P
$276.69
Each
units
Assorted Terminal Boxes Crimp Terminal Cable Ties, Crimp Terminal, Crimping Tool, End Splices, Sleeves - -
RS Stock No. 602-8177
Mfr. Part No.RS-KT-ZY
BrandJST
$177.30
1 Kit
Kit(s)
Spade Terminals Terminal V0.5-3A, V1.25-5A, V1.25-YS3A, V1.25-YS4A, V2-5A, V2-YS3A, V2-YS4A, V5.5-5A, V5.5-6A - -
New
RS Stock No. 200-6907
Mfr. Part No.COFTN50HX
$1,215.14
Each
units
Assorted Box with Tubular Lugs and Crimping Tool Crimp Terminal Copper Tubular Lugs, Crimping Tool - Copper
Related Products
The Knipex crimping set includes an assortment of ...
Description:
The Knipex crimping set includes an assortment of standard cable connectors with crimp grip pliers. All assembled in a plastic box, with two stackable plastic inserts with 6 trays each for the connectors. The crimping pliers provide a high transmission ...
Stripax plus pliers allow you to cut, strip ...
Description:
Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm2 and crimp wire-end ferrules with the same cross section.Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 ...
A range of french colour coded insulated bootlace ...
Description:
A range of french colour coded insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with dimensions that conform to DIN 46228-4: 1990-09 and color coding to french standard NF C 63-023: 1994-02.For ...
A range of insulated bootlace wire ferrules made ...
Description:
A range of insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with a colour range that conforms to DIN 46228-4: 1990-09. These insulated bootlace wire ferrules are available with twin wire entries ...