Fuse Holders & Accessories

We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

What is a fuse holder?

A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

What types of fuse holder are available?

You will find the following types on the site:

  • Base mount: enables the base of the holder to be attached to something with holes for screws
  • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
  • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
  • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
  • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

Why do fuse holders melt?

A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

How do I clean a fuse holder?

  • Ideally wear gloves, either rubber or plastic
  • Ensure the mains power is off and there are no live wires
  • Use a dry cloth or toothbrush to clean the connector springs
  • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
  • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
Fuse Blocks
Fuse Blocks
Fuse Clips
Fuse Clips
Fuse Covers
Fuse Covers
Fuse Holder Accessories
Fuse Holder Accessories
Fuse Holders
Fuse Holders
Fuse Pullers & Testers
Fuse Pullers & Testers
Neutral Links
Neutral Links
Solid Links
Solid Links

1588 Products showing for Fuse Holders & Accessories

1 of 80
In Stock
Eaton 10A PCB Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS Stock No. 311-0015
  • Mfr. Part No. HTC-45M
Subtotal (1 pack of 5 units)
$32.76(exc. GST)
$6.552/unit
In Stock
Eaton 30A Fuse Holder for 10 x 38 mm, 1P-Pole, 48V
  • RS Stock No. 849-5774
  • Mfr. Part No. CHCC1DU
Subtotal (1 unit)
$120.17(exc. GST)
$120.17/unit
In Stock
Bulgin 10A In-line Fuse Holder, 250V ac
  • RS Stock No. 414-601
  • Mfr. Part No. FX0380
Subtotal (1 pack of 5 units)
$73.75(exc. GST)
$14.75/unit
In Stock
Mersen 32A Rail Mount Fuse Holder, 1P-Pole, 500V ac
  • RS Stock No. 287-5799
  • Mfr. Part No. N218213 / CCR101
Subtotal (1 unit)
$25.57(exc. GST)
$25.57/unit
In Stock
Eaton Cartridge Fuse
  • RS Stock No. 849-5973
  • Mfr. Part No. FP-3
Subtotal (1 unit)
$187.54(exc. GST)
$187.54/unit
In Stock
Bulgin 10 A In-line Fuse Holder, 250 V ac
  • RS Stock No. 408-404
  • Mfr. Part No. FX0280
Subtotal (1 pack of 5 units)
$52.42(exc. GST)
$10.484/unit
In Stock
Bulgin 10A In-line Fuse Holder for 6.3 x 32 mm, 50V ac
  • RS Stock No. 420-044
  • Mfr. Part No. FX0185
Subtotal (1 pack of 5 units)
$117.98(exc. GST)
$23.596/unit
Stocked by manufacturer
Eaton 32 A Fuse Holder, 1P-Pole for 103 x 31 x 151 mm, 690 V ac
  • RS Stock No. 261-370
  • Mfr. Part No. RS32P
Subtotal (1 pack of 10 units)
$691.62(exc. GST)
$691.62/pack
In Stock
Wickmann 30 A In-line Fuse Holder, 32 V dc
  • RS Stock No. 170-6112
  • Mfr. Part No. 0FHM0002ZXJ
Subtotal (1 unit of 5 units)
$83.22(exc. GST)
$83.22/unit
In Stock
Eaton 20 A Fuse Holder, 1P-Pole for 55 x 79 mm, 690V
  • RS Stock No. 261-964
  • Mfr. Part No. RS20H
Subtotal (1 pack of 10 units)
$412.28(exc. GST)
$412.28/pack
Stocked by manufacturer
Eaton Fuse Holder Accessory Back Stud Kit
  • RS Stock No. 263-285
  • Mfr. Part No. 32BSC
Subtotal (1 pack of 10 units)
$268.32(exc. GST)
$268.32/pack
In Stock
Eaton 125 A Neutral Link for Cartridge Fuses, 22 mm x 58 mm
  • RS Stock No. 703-8526
  • Mfr. Part No. C22NL
Subtotal (1 pack of 10 units)
$178.23(exc. GST)
$17.823/unit
Stocked by manufacturer
Eaton 100 A Fuse Holder for 1.2 x 12.7 x 96 mm, 550 V ac
  • RS Stock No. 262-471
  • Mfr. Part No. OSC/LINK
Subtotal (1 pack of 10 units)
$187.15(exc. GST)
$187.15/pack
Stocked by manufacturer
Eaton 20A Fuse Holder for 60 x 94 mm, 1P-Pole, 690V
  • RS Stock No. 263-154
  • Mfr. Part No. CM20FW
Subtotal (1 pack of 10 units)
$570.29(exc. GST)
$570.29/pack
Stocked by manufacturer
Eaton 32A Fuse Holder for 31.8 x 93.7 x 60 mm, 1P-Pole, 690V
  • RS Stock No. 262-011
  • Mfr. Part No. CM32FG
Subtotal (1 pack of 10 units)
$823.12(exc. GST)
$823.12/pack
Temporarily out of stock
Mersen Rail Mount Fuse Holder
  • RS Stock No. 806-8423
  • Mfr. Part No. Z233725 / CMS810PAK
Subtotal (1 pack of 12 units)
$24.036(exc. GST)
$2.003/unit
In Stock
Littelfuse 16 A Panel Mount Fuse Holder, 1P-Pole for 6.3 x 32 mm, 250 V ac
  • RS Stock No. 787-4319
  • Mfr. Part No. 80000000105
Subtotal (1 pack of 5 units)
$26.10(exc. GST)
$5.22/unit
In Stock
Eaton 100A Rail Mount Fuse Holder for A2 British standard, 1P-Pole, 690V ac
  • RS Stock No. 413-939
  • Mfr. Part No. RS100H
Subtotal (1 unit)
$743.09(exc. GST)
$743.09/unit
In Stock
Littelfuse 20 A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250 V ac
  • RS Stock No. 787-4423P
  • Mfr. Part No. 03453LS1H
Subtotal 1 unit (supplied in a bag)
$10.03(exc. GST)
$10.03/unit
In Stock
Wickmann Fuse Holder Accessory Battery Clamp
  • RS Stock No. 342-0205
  • Mfr. Part No. 255.1000.0001
Subtotal (1 unit)
$61.47(exc. GST)
$61.47/unit
1
2
3
80
Results per page

Related links