Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Read more Read less

Filters

Viewing 21 - 40 of 122 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS Stock No. 784-5945
Mfr. Part No.256.2.5
BrandFacom
$12.76
Each
units
100 mm 7 mm 1 - Centre
RS Stock No. 701-0562
BrandRS PRO
$69.33
1 Set
Set(s)
120 mm 10 mm 5 - Drift
RS Stock No. 460-9550
BrandRS PRO
$60.41
Each
units
130 mm 17 mm 1 - Automatic
RS Stock No. 737-2793
Mfr. Part No.70070002
BrandSTAHLWILLE
$20.04
Each
units
150 mm 3 mm 1 - Parallel Pin
RS Stock No. 517-8372
BrandRS PRO
$52.12
Each
units
95 mm 11 mm 1 - Automatic
RS Stock No. 381-4896
BrandRS PRO
$48.47
1 Set
Set(s)
4 in 1.6 → 4 mm 5 - Centre
RS Stock No. 878-3090
Mfr. Part No.SCMT27190
BrandSidchrome
$183.76
Each
units
- 2 → 6.5 mm 7 - Short Pin
RS Stock No. 701-0568
BrandRS PRO
$79.15
1 Set
Set(s)
Flat Chisel: 125; Cross Head Chisel: 125; Rivet Punch (x2): 120; Centre Punch: 125 mm 10 mm 5 - Anti-Vibration
RS Stock No. 772-4390
Mfr. Part No.116 A
BrandGedore
$112.76
Each
units
150 mm 10 mm 6 - -
RS Stock No. 875-4758
BrandRS PRO
$22.54
Each
units
- - 3 - Centre
RS Stock No. 878-3093
Mfr. Part No.SCMT27305
BrandSidchrome
$220.92
Each
units
- 12 → 25 mm 5 - Short Pin
RS Stock No. 125-3901
Mfr. Part No.316D
BrandGedore
$50.56
Each
units
- 3 → 10 mm 6 - Parallel Pin
RS Stock No. 188-3752
Mfr. Part No.255.G4
BrandFacom
$19.79
Each
units
- 4.0 mm 1 - Centre
RS Stock No. 282-782
Mfr. Part No.J2
$171.19
Each
units
4 4/8 → 6 in 1/4 → 7/16 in 12 - -
RS Stock No. 124-6124
Mfr. Part No.TAH3734BM-8
BrandBahco
$37.63
Each
units
- 8.0 mm 1 - Parallel Pin
RS Stock No. 188-3764
Mfr. Part No.251A.3
BrandFacom
$27.68
Each
units
- - - - -
RS Stock No. 733-744
Mfr. Part No.351ARS
BrandEclipse
$14.92
Each
units
100 mm 3.2 mm 1 90° Fine Machine Point
RS Stock No. 784-5932
Mfr. Part No.249.GJ7
BrandFacom
$165.87
Each
units
140 mm, 150 mm, 190 mm, 200 mm, 210 mm, 216 mm, 230 mm 8 mm, 10 mm, 12 mm, 14 mm 7 - Anti-Vibration
RS Stock No. 182-9787
BrandRS PRO
$9.05
Each
units
- 4.0 mm 1 - Centre
RS Stock No. 188-3813
Mfr. Part No.249.10
BrandFacom
$17.19
Each
units
- - - - -
Related Products
Two hand operated centre punches which do not ...
Description:
Two hand operated centre punches which do not require a hammer to be used. Once positioned and pressed the punches make an impression to the depth set by a knurled impact adjuster. The tool resets when removed from the workpiece.Small ...
Bahco Bachofit AWL for pre-punching and drilling holes. ...
Description:
Bahco Bachofit AWL for pre-punching and drilling holes. Two component handle with vertical groves for comfortable grip. Black finish tip for higher accuracy. Handle marking for quick identification of the tip.
Hardened, tempered and sharpened blades for clean cutting ...
Description:
Hardened, tempered and sharpened blades for clean cutting of wood fibres. Nickel plated bar to resist corrosion. Specially shaped and textured handle for improved grip. The blade shaft is cranked to prevent it turning in the handle. Blade dimensions (LxW): ...
Tool fitted with a FACOM SLS attachment solution, ...
Description:
Tool fitted with a FACOM SLS attachment solution, preventing any risk of accidental falls. The turning crimped cable solution, chosen and tested by FACOM, preserves the ergonomics of use of the tool. Long stem. Head hardness 43 HRc. Stem hardness ...