Extractor Fans

Extractor fans also known as wall fans are designed to remove moisture, fumes and unwanted odours from the air to improve the air quality. In domestic and commercial properties it is important to reduce condensation and provide ventilation in the kitchen, bathroom, shower room, wet room and laundry room. Nowadays it is a legal requirement to have an extractor fan in new builds.


The airflow of a fan is in cubic feet per hour (m³/h) and is an important factor when deciding on which type of fan you require. A large variety of wall fans is available in a range of styles and colours to suit all room sizes and locations. Some of these ventilation fans can be very nosy therefore silent extractor fans are worth considering if noise is an issue. Most fans come with a mounting kit, pull cord or automatic shutter options and some have special features such as humidistat, timers and remote controls


Basic types of fans for extraction, intake and ventilation are:


  • Axial fans – most common type, usually wall mounted to internal walls and depending on the cavity depth these wall mounted fans require ducting to reach the exterior wall

  • Centrifugal extractor fans - which are ceiling mounted. General found in commercial and industrial environments that need elongated ducting and can be nosy

  • Inline extractor fan – can be axial or centrifugal but they are not installed on walls and ceilings but found in the loft space above a ceiling

Where to place fans?


  • Kitchen – removes cooking smells, steam and traps grease therefore providing healthier environment

  • Bathroom – to provide ventilation and reduce condensation from the steam after a hot shower or bath. This prevents damp and mouldy patches which can cause health problems as unventilated conditions are ideal for bacteria to live. Also removes unwanted bad smells after using the toilet

  • Shower rooms or wet rooms – bathroom ceiling extractor fans remove moisture from showering

  • Window – some window fans can be mounted on the window but a special kit is required for these window vents

...
Read more Read less

Filters

Viewing 121 - 140 of 172 products
Results per page
Description Price Function Air Flow Noise Level Mounting Face Diameter Face Dimensions Depth Face Height Face Width Configuration Series Special Features Termination Type
RS Stock No. 2552277142
Mfr. Part No.MV252E
BrandFantech
$981.71
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277476
Mfr. Part No.SILDES100CZ3C-W
BrandFantech
$228.92
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277405
Mfr. Part No.EDM-200CT
BrandFantech
$523.89
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277460
Mfr. Part No.SILDES200CZ3C-W
BrandFantech
$271.95
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277387
Mfr. Part No.HXM-300
BrandFantech
$646.84
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277176
Mfr. Part No.RP202
BrandFantech
$697.55
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277141
Mfr. Part No.MV304S
BrandFantech
$989.39
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277107
Mfr. Part No.PFA304ST
BrandFantech
$1,253.65
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277057
Mfr. Part No.FM600-WDF-1
BrandFantech
$12,039.30
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277131
Mfr. Part No.MV302E
BrandFantech
$1,056.96
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277450
Mfr. Part No.SILDES200CZ3C-S
BrandFantech
$291.96
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277459
Mfr. Part No.SILDES100CHZ3C-W
BrandFantech
$271.95
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277175
Mfr. Part No.HV-230CAP
BrandFantech
$702.09
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277171
Mfr. Part No.MV132S
BrandFantech
$729.77
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277058
Mfr. Part No.24CFO-SWDS-3-WM
BrandFantech
$7,094.54
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277167
Mfr. Part No.MV112E
BrandFantech
$780.48
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277115
Mfr. Part No.PFA304ED
BrandFantech
$1,187.59
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277415
Mfr. Part No.EDM-100CT
BrandFantech
$460.97
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277135
Mfr. Part No.MV254S
BrandFantech
$1,040.10
Each
units
- - - - - - - - - - - - -
RS Stock No. 2552277453
Mfr. Part No.HCM-150CAP
BrandFantech
$279.63
Each
units
- - - - - - - - - - - - -
Related Products
High performance extract/intake fans for use in single ...
Description:
High performance extract/intake fans for use in single and double glazing, and most types of materials up to 32mm thick. A unique speed control pack enables high, medium or low speeds to be preset to suit room size or specific ...
High performance intake/extract fans incorporating a speed control ...
Description:
High performance intake/extract fans incorporating a speed control pack which enables high, medium or low speeds to be preset to suit room size or specific requirements. Can be mounted at any angleLow density 5 blade impellerOperating temperature range -40 to ...
Round, easy to install, intake/extract fans with a ...
Description:
Round, easy to install, intake/extract fans with a spigot and ring fixing method which provides a watertight joint with most types of glazing. Thermal overload protected motor which will run at any angleLow noise, low density, 5 blade impellerOperating temperature ...
Low profile fans with integral switch for intake, ...
Description:
Low profile fans with integral switch for intake, extract or external controller modes. Maintenance free motor with thermal protectionMotor isolated when the cover is removedSilent shutter operation via thermal wax actuatorSnap-fit cover for easy cleaningSuitable for use with Xpelair controllers, ...