Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 41 - 45 of 45 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Series Voltage Rating
RS Stock No. 237-0553
Mfr. Part No.A105000AAD
$4.95
Each
units
Panel Mount LED Screw In Wire Leads 10mm 16.9 mm 5 mm 8mm 7mm - - -
RS Stock No. 387-5380
Mfr. Part No.LMU/MES/4
BrandTranilamp
$10.17
Each
units
Panel Mount - E10 Cable Clamp 35mm 42 mm - - - Panel Mount LMU -
RS Stock No. 237-0474
Mfr. Part No.A104700AAA
$4.48
Each
units
Panel Mount LED - Wire Leads 7.6mm 13.9 mm 3 mm 6.3mm 6.3mm - - -
RS Stock No. 237-0480
Mfr. Part No.A104700AAC
$4.36
Each
units
Panel Mount LED - Wire Leads 7.6mm 13.9 mm 3 mm 6.3mm 6.3mm - - -
RS Stock No. 141-4006
Mfr. Part No.44-10062-0313
BrandVogt
$1.71
Each
units
PCB Mount - E10 - - - - - - - - -
Related Products
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
Chromed bezel lampholders, available with flat or domed ...
Description:
Chromed bezel lampholders, available with flat or domed lens. Rear access to lamp. Ratings: Max. voltage between contacts, 150V; max. voltage between contacts and case 500V; max. Compatible with all our transformer indicator lampholdersØ28.5mm & 31.5mm chromed brass bezel5mm max. ...
Range of illuminated panel-mounted switches available in square, ...
Description:
Range of illuminated panel-mounted switches available in square, rectangular and circular momentary or latching versions. Square or rectangular lamp terminals are also available. Suitable lamps: T5·5, see the Optoelectronics / Indicators section. Panel mounting switches in modular format Separate Lenses, ...
Square or rectangular switches and matching indicators with ...
Description:
Square or rectangular switches and matching indicators with 110 (0.110in) terminals. Illumination is by 6mm wedge bulbs, square types have one lamp circuit, rectangular have twoDPDT momentary or latching action. Illuminated or non-illuminated. Integral lamp puller for easy removal of ...