Ferrite Beads

"

Ferrite Beads also known as ferrite chokes are passive devices and they are used to constrict high-frequency signals in electronic components. The ferrite becomes resistive over its intended frequency range and uses up the noise energy in the form of heat.

How do the ferrite beads work?

The ferrite bead is connected in series with the power supply rail and is often combined with the capacitors to ground on either side of the bead. This then forms a low-pass filter network, further reducing the high-frequency power supply noise. Use SPICE (Simulation Program with Integrated Circuit Emphasis) or another similar tool to ensure any anti-resonance peaks caused by ferrite or PCB inductive structure does not violate the target impedance limit.

Ferrite Beads come in two categories:

High-Q Beads - typically used as resonators and must not be used in power isolation circuits

Low-Q Beads - these are also called absorptive beads and they are lossy and make good filter networks because they are designed to absorb high-frequency noise currents and dissipate it as heat

What to consider when choosing Ferrite Beads?

Make sure that any voltage drop does not cause the target supply rail to fall below the recommended operating conditions of the device

The ferrite bead is inductive, therefore do not use it with High-Q decoupling capacitors

Applying ferrite beads correctly can be an effective and inexpensive way to reduce high-frequency noise and switching transients

Where are Ferrite Beads used?

Eliminating high-frequency EMI noise on any circuit design

Electronic devices such as mobile phones

Computers and laptops

TV tuners

Audio Players

DVDs

Gaming Systems

"

...
Read more Read less

Filters

Viewing 1 - 20 of 154 products
Results per page
Description Price Package Type Impedance at 25 MHz Impedance at 100 MHz Impedance at 300 MHz Impedance at 500 MHz Impedance at 1 GHz Current Rating Type Dimensions Length Depth Height Diameter Application
RS Stock No. 863-7376
Mfr. Part No.5-1624116-7
$0.202
Each (In a Bag of 100)
units
0603 (1608M) - - - - - - Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - High Current, Noise Filtering
RS Stock No. 863-7243
Mfr. Part No.4-1624116-2
$0.202
Each (In a Bag of 100)
units
0603 (1608M) - - - - - - Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - General Purpose, High frequency
RS Stock No. 812-0767
Mfr. Part No.BMB2A0300LN2
$0.153
Each (In a Bag of 100)
units
0805 (2012M) - - - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Signal Line, Telecom
RS Stock No. 164-5831
Mfr. Part No.4-1624116-7
$0.118
Each (On a Reel of 4000)
units
0603 (1608M) - - - - - - Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - High Current, Noise Filtering
RS Stock No. 863-7344
Mfr. Part No.5-1624117-9
$0.197
Each (In a Bag of 100)
units
0805 (2012M) - 20Ω - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - High Current, Noise Filtering
RS Stock No. 162-1665
Mfr. Part No.BMB2A0120AN4
$0.054
Each (On a Reel of 4000)
units
0805 (2012M) - 120Ω - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - EMI Filtering, General Electronics
RS Stock No. 812-0795
Mfr. Part No.BMB2A0120BN3
$0.177
Each (In a Bag of 100)
units
0805 (2012M) - 120Ω - - - - Chip Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - High Frequency
RS Stock No. 863-7247
Mfr. Part No.4-1624116-3
$0.173
Each (In a Bag of 100)
units
0603 (1608M) - - - - - - Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - General Purpose, High frequency
RS Stock No. 164-5832
Mfr. Part No.4-1624116-8
$0.118
Each (On a Reel of 4000)
units
0603 (1608M) - - - - - - Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - High Current, Noise Filtering
RS Stock No. 863-7262
Mfr. Part No.4-1624117-7
$0.197
Each (In a Bag of 100)
units
0805 (2012M) - - - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - General Purpose, High frequency
RS Stock No. 164-5696
Mfr. Part No.1879855-4
$0.121
Each (On a Reel of 10000)
units
0402 (1005M) - 120Ω - - - - Ferrite Bead 1 x 0.5 x 0.32mm 1mm 0.5mm 0.32mm - -
RS Stock No. 863-7102
Mfr. Part No.1879855-7
$0.176
Each (In a Bag of 100)
units
0402 (1005M) - - - - - - Ferrite Bead 1 x 0.5 x 0.32mm 1mm 0.5mm 0.32mm - General Purpose, High frequency
RS Stock No. 863-7297
Mfr. Part No.1-1879855-6
$0.176
Each (In a Bag of 100)
units
0402 (1005M) - - - - - - Ferrite Bead 1 x 0.5 x 0.32mm 1mm 0.5mm 0.32mm - High Current, Noise Filtering
RS Stock No. 164-5845
Mfr. Part No.4-1624117-9
$0.156
Each (On a Reel of 4000)
units
0805 (2012M) - - - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - -
RS Stock No. 863-7275
Mfr. Part No.5-1624117-2
$0.197
Each (In a Bag of 100)
units
0805 (2012M) - 200Ω - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - General Purpose, High frequency
RS Stock No. 863-7284
Mfr. Part No.5-1624117-3
$0.22
Each (In a Bag of 100)
units
0805 (2012M) - 300Ω - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - General Purpose, High frequency
RS Stock No. 161-5745
Mfr. Part No.BMB2A0120BN3
$0.127
Each (On a Reel of 4000)
units
0805 (2012M) - 120Ω - - - - Chip Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - High Frequency
RS Stock No. 863-7206
Mfr. Part No.4-1624117-2
$0.108
Each (In a Bag of 100)
units
0805 (2012M) - 1000Ω - - - - Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - General Purpose, High frequency
RS Stock No. 863-7300
Mfr. Part No.1-1879855-8
$0.176
Each (In a Bag of 100)
units
0402 (1005M) - - - - - - Ferrite Bead 1 x 0.5 x 0.32mm 1mm 0.5mm 0.32mm - High Current, Noise Filtering
RS Stock No. 863-7253
Mfr. Part No.4-1624116-6
$0.202
Each (In a Bag of 100)
units
0603 (1608M) - - - - - - Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - General Purpose, High frequency