Brass & Copper Push Fit Fittings

Copper Pipe Fittings
Copper is used as it can tolerate very high temperatures and as such, is used widely for central heating applications

Different types of Fittings

Adapters
Adapters are used to extend runs, or to simply change the connection type at the end of a pipe

Bushings
Bushings are used to join pipes of different sizes, usually by reducing a larger fitting down to a smaller pipe.

Couplings
A coupling is used to extend the run of a pipe, or change pipe sizes

Elbows
If you need to change the direction of flow, elbows are likely your best bet. Produced primarily in 90 and 45 degree angles (unique sizes like 22.5 and 60 are also available), elbows can be threaded or sweated, and are one of the most crucial fittings used in plumbing

Tees
When more than one branch is required of a water supply, tees are the way to go. Essentially a long coupling with an outlet on the side, these fittings feature their outlets at 90° from the inlet, and are sized according to their "run" (the horizontal, or straight-through dimension of the fitting), and the side outlet (the "top" of the fitting, 90 degrees off the run). When the run of a tee is smaller than the side outlet, it's often referred to as a "bull head" fitting.

Caps and Plugs
A cap, as its name suggests, is a cap that goes over the end of a pipe, creating a dead end. Plugs also stop up a pipe or tube system, but are plugged, like a stopper, into the end of the pipe.

Cross type Fitting
Cross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.

...
Read more Read less

Filters

Viewing 1 - 20 of 26 products
Results per page
Description Price Fitting Direction Fitting Type Push Fit Pipe Size Threaded Connection Threaded Tee Connection Demountable Connection Gender Tee Gender Thread Size Thread Size Tee Thread Standard Thread Standard Tee Material
RS Stock No. 712-6733
Mfr. Part No.65267
$8.34
Each (In a Pack of 2)
units
Straight Taper Coupler 15mm 1/2 in R Male - Yes - Male 1/2in - R - Brass
RS Stock No. 199-2360
Mfr. Part No.15MC(1/2)BRASS
BrandJohn Guest
$16.76
Each
units
Straight Coupler 15mm 1/2 in BSP Male - Yes - Male 1/2in - BSP - Brass
RS Stock No. 468-6210
Mfr. Part No.15SVSTC
BrandJohn Guest
$26.36
Each
units
- Service Valve 15mm - - Yes - - 1/2in - BSP - Brass
RS Stock No. 199-2376
Mfr. Part No.22MC(3/4)BRASS
BrandJohn Guest
$24.22
Each
units
Straight Coupler 22mm 3/4 in BSP Male - Yes - Male 3/4in - BSP - Brass
RS Stock No. 712-6714
Mfr. Part No.65516
$7.515
Each (In a Pack of 2)
units
90° Elbow 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6749
Mfr. Part No.65206
$13.04
Each
units
Straight Coupler 15mm 1/2 in G Female - Yes - Female 1/2in - G - Brass
RS Stock No. 340-6760
Mfr. Part No.MM051504N
$10.63
Each (In a Pack of 3)
units
Straight Stem Adapter 15mm 1/2 in R Male - - - Male 1/2in - R - Brass
RS Stock No. 340-6776
Mfr. Part No.MM052206N
$18.31
Each (In a Pack of 3)
units
Straight Stem Adapter 22mm 3/4 in R Male - - - Male 3/4in - R - Brass
RS Stock No. 468-6197
Mfr. Part No.15HSV
BrandJohn Guest
$30.83
Each
units
- Service Valve 15mm - - Yes - - 1/2in - BSP - Brass
RS Stock No. 712-6718
Mfr. Part No.65936
$15.94
Each
units
- Draining Tap 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6730
Mfr. Part No.65524
$14.56
Each
units
90° Elbow 22mm - - Yes - - - - - - Brass
RS Stock No. 712-6770
Mfr. Part No.65676
$21.22
Each
units
- Equal Tee 22mm - - Yes - - - - - - Brass
RS Stock No. 712-6742
Mfr. Part No.65866
$7.205
Each (In a Pack of 2)
units
- End Stop 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6720
Mfr. Part No.65496
$7.86
Each (In a Pack of 2)
units
90° Street Elbow 15mm - - Yes - - - - - - Brass
RS Stock No. 712-6768
Mfr. Part No.65874
$11.15
Each
units
- End Stop 22mm - - Yes - - - - - - Brass
RS Stock No. 712-6736
Mfr. Part No.65950
$20.06
Each
units
- Service Valve 15mm - - Yes - - - - - - Brass
RS Stock No. 340-6754
Mfr. Part No.PM22WB
$31.33
Each
units
90° Wall Plate Elbow Adapter 22mm - - - - - 3/4in - BSP - Brass
RS Stock No. 840-5696
Mfr. Part No.SB0154E
BrandSharkbite
$92.02
Each
units
Straight Coupler 54mm - - Yes - Female - - - - Brass
RS Stock No. 712-6727
Mfr. Part No.65114
$7.82
Each (In a Pack of 2)
units
Straight Coupler 15mm - - Yes - - - - - - Brass
RS Stock No. 340-6748
Mfr. Part No.PM15WB
$27.63
Each
units
90° Wall Plate Elbow Adapter 15mm - - - - - 1/2in - BSP - Brass
Related Products
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 ...
Description:
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. No need to prepare threaded pipe or apply solvent. Easy and quick to install, simple push-in connections. Safe, secure and leak-proof, ready for immediate ...
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories. Suitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and ...
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories. Suitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...