Motorised & Actuated Valves

Motorised valves are used to control water flow from the boiler to heating and hot water circuits, and is operated electrically. Types of motorised valves:A motorised valve can be a 2 port valve or a 3 port valve.2-port - The valve has 2 pipe connections (ports) and permits or blocks flow between the ports depending on whether it is actuated or not. Flow is permitted when the valve is actuated and blocked in its resting state.3-port - The valve has 3 pipe connections, in a T formation. The centre leg of the T is the inlet and the two short arms are the outlets, usually referred to as ports A and B. Actuation controls whether the flow from the inlet passes to the A or B port. In the resting state flow is to the B port (usually the hot water circuit).Actuated valvesActuated valves are the mechanism for opening and closing the valve, an actuator requires a control signal and a source of energy. Actuators may be only to open and close the valve, or may allow intermediate positioning; some valve actuators include switches or other ways to remotely indicate the position of the valve.Valves and Actuators are two completely separate components; however, they do work together to accomplish a common task.

...
Read more Read less

Filters

Viewing 21 - 40 of 50 products
Results per page
Description Price Compatible Pipe Size Number of Ports Maximum Working Pressure Supply Voltage Body Material
RS Stock No. 799-8834
BrandRS PRO
$806.79
Each
units
1/2in 3 1000 psi 24 V ac/dc, 110 V, 220 V Stainless Steel
RS Stock No. 799-8799
BrandRS PRO
$416.07
Each
units
2in - - - EPDM Liner
RS Stock No. 799-8803
BrandRS PRO
$536.83
Each
units
2-1/2in - - - EPDM Liner
RS Stock No. 799-8838
BrandRS PRO
$851.57
Each
units
3/4in 3 1000 psi 24 V ac/dc, 110 V, 220 V Stainless Steel
RS Stock No. 799-8771
BrandRS PRO
$549.43
Each
units
3/4in 3 1000 psi - Stainless Steel
RS Stock No. 805-6058
BrandRS PRO
$222.09
Each
units
1/4 in, 1/8 in 2 100 psi - Extruded Aluminium Alloy
RS Stock No. 799-8796
BrandRS PRO
$1,563.19
Each
units
2in 3 800 psi - Stainless Steel
RS Stock No. 799-8777
BrandRS PRO
$517.56
Each
units
1/2in 3 1000 psi - Stainless Steel
RS Stock No. 799-8759
BrandRS PRO
$499.16
Each
units
3/4in 3 1000 psi - Stainless Steel
RS Stock No. 812-5233
BrandRS PRO
$54.73
Each
units
1in 1 40 bar - Brass
RS Stock No. 799-8793
BrandRS PRO
$395.12
Each
units
2in - - - Nitrile Liner
RS Stock No. 812-5249
BrandRS PRO
$216.63
Each
units
2in 2 40 bar - Brass
RS Stock No. 805-6042
BrandRS PRO
$131.01
Each
units
1/4 in, 1/8 in 5 100 psi - Extruded Aluminium Alloy
RS Stock No. 799-8831
BrandRS PRO
$647.10
Each
units
3in - - - Nitrile Liner
RS Stock No. 799-8800
BrandRS PRO
$542.12
Each
units
3in - - - EPDM Liner
RS Stock No. 799-8828
BrandRS PRO
$623.15
Each
units
2-1/2in - - - Nitrile Liner
RS Stock No. 799-8765
BrandRS PRO
$700.08
Each
units
1-1/2in 3 800 psi - Stainless Steel
RS Stock No. 812-5245
BrandRS PRO
$138.27
Each
units
1-1/2in 1 40 bar - Brass
RS Stock No. 799-8825
BrandRS PRO
$623.15
Each
units
2-1/2in - - - EPDM Liner
RS Stock No. 799-8761
BrandRS PRO
$780.34
Each
units
1-1/4in 3 800 psi - Stainless Steel
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals. Creep resistant bearings. Reinforced nylon handle. Reduced risk of contamination by top and bottom seals. Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar. Polished disc.
Application : Industry, pneumatics, hydraulic, plumbing installations. Operating ...
Description:
Application : Industry, pneumatics, hydraulic, plumbing installations. Operating Temperature : -20゚C / +100゚C Operating pressure : see non-shock cold working pressure chart on data sheet. Threads : ISO 228 parallel female by female threads Stem : NylonNBR 65 SH/PS seal ...
For heating, sanitary and compressed air systems, pumps ...
Description:
For heating, sanitary and compressed air systems, pumps and autoclaves. Body in hot forged DZR brass. Threading to BS2779Hostaform inner valve. Spring in 18//8 AISI 302-304 stainless steel. Hydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow ...
RS Pro Brand Screwed End Swing Check Valves ...
Description:
RS Pro Brand Screwed End Swing Check Valves that allow liquids to flow in only one direction. 1/2 - 3" (DN15 - DN80)W.P: 200 WOGW.T: -20°C - 200°C (-4°F - 392°F)Investment casting. Socket weld (option)Thread type: ASME B1.20.1 (NPT), DIN ...