Signal bar for auxiliary contact

  • RS Stock No. 914-4623
  • Mfr. Part No. 2CDE605200R0021
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.

Selective load protection
Reliable overload disconnection with 1.1 x Input plus
Manual ON/OFF button
Clear status and failure indication through LED and integrated auxiliary contact
Integral fail-safe element adjusted to current rating
Width per unit only 12.5 mm
DIN rail mounting
Easy wiring through busbar LINE+ and 0 V as well as signal bars

Specifications
Attribute Value
Colour Grey
For Use With Auxiliary Contact
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 9.70
(exc. GST)
$ 11.16
(inc. GST)
units
Per unit
1 +
$9.70
Related Products
The Siemens range of 5ST3 busbars allow devices ...
Description:
The Siemens range of 5ST3 busbars allow devices such as the 5SV to be bus-mounted easily and safely in 2 or 4 phases. Simple wiring of all phases/conductors with one busbar. Auxiliary switches can be connected when busbar installed. Can ...
Rated 63A, 690V a.c.For distribution of power to ...
Description:
Rated 63A, 690V a.c.For distribution of power to MS116 motor starters in a panel. Number of devices accommodated, and auxiliary switch detail shown below.
Busbars for safe and rational connection of distributor ...
Description:
Busbars for safe and rational connection of distributor installation devices, e.g. automatic cut-outs (MCB)1 and 3-phase versions available. No end caps supplied with cut-to-length busbars, please order separately.
Professional range of ABB distribution busbars and endcaps. ...
Description:
Professional range of ABB distribution busbars and endcaps. Wide range of electrical phases, operational voltages and number of modules to choose from. Various electrical phases available. Wide range of operational voltages. Good selection and choice regarding the 'Number of Modules' ...