Schneider Electric Tesys D LC1D 4 Pole Contactor, 4NO, 20 A, 24 V ac Coil

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CZ
Product Details

4 Pole Contactors AC Controlled

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys LCD1 contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

Utilisation category AC1
Auxiliary contact configuration one N/O, one N/C
Width of LC1D contactors is 45mm
Closing time of LC1D series is 12-22ms, opening time is 4-19ms
These contactors must not be used with TeSys overload relays, interconnection units or GV2 circuit breakers

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Is the TeSys D range a double break pole type contactor?

Yes, the TeSys D range uses linear translation movement that provides double breaking of the poles.

Approvals

UL and CSA

Specifications
Attribute Value
Coil Voltage 24 V ac
Number of Poles 4
Contact Current Rating 20 A
Range TeSys D
Series LC1D
Normal State Configuration 4NO
Contact Voltage Rating 690 V ac
Number Of Auxiliary Contacts 2
Terminal Type Cage Clamp
Width 45mm
Depth 92mm
Maximum Operating Temperature +60°C
Length 99mm
Minimum Operating Temperature -5°C
On back order for despatch 18/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 103.22
(exc. GST)
$ 118.70
(inc. GST)
units
Per unit
1 +
$103.22
Related Products
Utilisation category AC3415 Vac switching voltage. Pole Contact ...
Description:
Utilisation category AC3415 Vac switching voltage. Pole Contact Composition: 3 NOAuxiliary Contacts: 1 N/O + 1 N/C.
Te. Sys D Contactors from Schneider Electric combine ...
Description:
Te. Sys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type ...
Te. Sys K Silent Miniature Contactors from Schneider ...
Description:
Te. Sys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP1K range are DC operated contactors recommended for use in areas sensitive to noise and high interference mains ...
Te. Sys contactors fitted with Everlink power terminals, ...
Description:
Te. Sys contactors fitted with Everlink power terminals, with hexagon socket-head screw.Allows for a single piece starter assembly with an Everlink breaker (vertical or side by side assembly).