Facom Hand Crimping Tool for Insulated Terminal

  • RS Stock No. 504-3260
  • Mfr. Part No. 673838
  • Manufacturer Facom
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Crimp tool for pre-insulated terminals

Facom crimp tools are known for its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The construction manufactured for lightweight yet durable materials guarantee long life and hassle-free operation. Ergonomically shaped and rubber-coated handles increases anti-slip, safety and comfort, so even longer operating is injury-free.

Features and Benefits:
• Lower fixed jaw for easy terminal fitting
• Double crimping with a visual die mark on the insulator
• Stainless steel die with 3 cavities to choose from (Red - 0.5mm to 1.5mm; Blue - 1.5mm to 2.5mm and Yellow - 4mm to 6mm)
• An automatic hold of the terminal before and after crimping.
• Designed to be used for one-handed crimping (suitable for both left and right hand)
• Automatic positioning of the terminal in the grips

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Double crimping.
Stainless steel matrix.
Automatic hold of the terminal before and after crimping.
Left/right handed tool, for one-handed crimping.
Automatic positioning of the terminal in the grips.

Specifications
Attribute Value
Crimp Tool Type Hand
Crimp Connector Type Insulated Terminal
Overall Length 228mm
3 : Next working day
20 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 176.56
(exc. GST)
$ 203.04
(inc. GST)
units
Per unit
1 +
$176.56
Related Products
Contains a total of 900 Solistrand ring terminals ...
Description:
Contains a total of 900 Solistrand ring terminals and splices incorporating 18 of the most popular styles. Wire range 0.25-6.6mmHigh grade conductive copper per ASTM B-152, tin platedExceeds requirements of MIL-T7928, Class 1 & 2For suitable tooling see Certi-Lok tool, ...
JWPF connector can be used for the place ...
Description:
JWPF connector can be used for the place of which especially waterproof is required this is wire to board connector that is grade 7 ingress protection of JIS C0920. waterproof performancecontained seal ringsolid rubber sealdouble spring constructionhousing to terminal locksinner ...
All planforms require crimp contacts with the exception ...
Description:
All planforms require crimp contacts with the exception of the 5 +PE configuration which is supplied complete with screw termination contacts.Bayonet locking, robust, lightweight plastic connectors suited for machinery, light and sound applications and where power and control are required ...
SDE die assemblies for use with commercial grade ...
Description:
SDE die assemblies for use with commercial grade SDE (Standard Die Envelope) PRO-CRIMPER III crimping tool (stock number 849-114) and the SDE-SA commercial grade hand crimp tool (stock number 448-7883).These crimp dies are precision designed and manufactured and available for ...