Harting Plier Crimping Tool for Coaxial

  • RS Stock No. 693-1137
  • Mfr. Part No. 09990000501
  • Manufacturer HARTING
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Harting Hand Crimping Tool for Turned D-Sub Contacts

A quality hand crimping tool for crimping turned D-sub male and female coaxial inner contacts and signal contacts. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps.
An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits
• Produces crimps according to MIL-DTIL-22520/2-01
• A wide wire size range of 32-20 AWG
• 8-step selector knob for crimp depth selection
• Ratchet mechanism ensures that a full crimp cycle is achieved
• Minimum maintenance required

Locator
The locator for this hand crimp tool must be purchased separately, see stock number 756-7345.

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

FAQ:
How easy are they to use?
They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?
• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Connector Type Coaxial
Crimp Tool Type Plier
Overall Length 174 mm
22 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
$ 1,376.22
(exc. GST)
$ 1,582.65
(inc. GST)
units
Per unit
1 - 49
$1,376.22
50 - 99
$1,341.80
100 - 249
$1,271.20
250 - 499
$1,233.80
500 +
$1,202.96
Related Products
This hand crimping tool is designed for field ...
Description:
This hand crimping tool is designed for field installation, repair, maintenance work or prototyping in industrial, commercial or institutional applications. The PRO-CRIMPER III hand tools are ergonomically designed as they have a thin and comfortable handle and are built to ...
The proven HX4 (M22520/5-01) ratchet crimp tool frame ...
Description:
The proven HX4 (M22520/5-01) ratchet crimp tool frame with interchangeable coaxial connector crimp die sets, eliminates the need for separate dedicated crimp tools. Crimp dies are snapped into the frame and retained with internal spring clips. A selection of dies ...
A range of crimp dies for the Pressmaster ...
Description:
A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number 492-9595). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
A range of XM crimp tool dies suitable ...
Description:
A range of XM crimp tool dies suitable for a wide variety of HDTV Series BNC and F Plugs when used in conjuction with the XM Type crimp tool specifically designed for use when assembling BNC and F Plugs. The ...