Georg Fischer ABS 10bar Diaphragm Valve, 29.514.510 11/4

  • RS Stock No. 742-2781
  • Mfr. Part No. 29.514.510 11/4
  • Manufacturer Georg Fischer
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

Type 514 ABS Diaphragm Valves

Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.
Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterised by homogeneous temperature behaviour, an even surface pressure and high pressure rating up to 16 bar. The optimal flow geometry offers double flow with same energy expenditure. With almost linear flow characteristics this guarantees stable processes.
Beyond that the weir of the branched valve has been moved directly to the pipe wall of the main line. Therefore dead leg was reduced to an absolute minimum and thus the hygiene was increased at the same time.
Standard equipment like a lockable handwheel, a two-coloured indicator and an interface for a self-adjusting limit switch set new standards in terms of user-friendliness.

Fields of Application:
Chemical Process Industry
Life Science
Microelectronics
Water Treatment
Food and Beverage
Measurement and Control
Applications with high viscosity and solid content

Double flow rate compared to predecessor
One housing nut replaces four screws compared to predecessor
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length

Diaphragm Valves - PVC-U and ABS

10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole.

Specifications
Attribute Value
Attachment Type Socket
Pipe Diameter 2in
Body Material ABS
Connection 1-1/4 in Socket
Pressure Rating 10bar
Flow Factor Kv 759L/min
Maximum Operating Temperature +60°C
Minimum Operating Temperature -40°C
Operating Temperature Range -40 → +60 °C
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 218.46
(exc. GST)
$ 251.23
(inc. GST)
units
Per unit
1 - 4
$218.46
5 +
$213.01
Related Products
WRAS approved water management system that complies with ...
Description:
WRAS approved water management system that complies with Bylaw 82 and 83ABS bodyPIR sensor 54μA (nominal current), 750mA (peak current for 50ms), 6Vdc (Voltage)Sensor range 3m – 4m. Field of view 138º (horizontal), 125º (vertical)Infrared sensor unit may be fitted ...
Compact ball valve type 353 PVC-U with solvent ...
Description:
Compact ball valve type 353 PVC-U with solvent cement sockets. Suitable for applications with water and generally used in agriculture, irrigation, swimming pools, fish farming and water distribution. Monoblock body prevents ball blow-out. Ball shaft with failsafe feature. Backing 'O' ...
Ball valve type 546 PVC-U with solvent cement ...
Description:
Ball valve type 546 PVC-U with solvent cement sockets. Suitable for use in water treatment, ship building, food and beverage, CPI and microelectronics. Union type ends, easy installation/removal. Solvent cement jointing, plain borePTFE Ball Seals. Operating Temperature Range 0°C to ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. Time efficient, no nonsense one ...