Schneider Electric DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 10A Output Current

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

Filtered rectified power supplies ABL 8TEQ

Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value. On three phases, between phase and neutral or between two phases, filtered rectified, particularly recommended for instances when high power is required to control actuators and pre-actuators. Specifically designed for "All 24 V" equipment as well as for direct current valves or solenoid valve automated controllers.

Standards

cULus, ENEC

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 400V ac
Output Voltage 24 V dc
Output Current 10 A
Power Rating 240W
Number of Outputs 1
Electrical Phase 3
Type Linear
Height 190mm
Depth 78mm
Minimum Temperature -20°C
Maximum Temperature +55°C
Ripple And Noise 480mV
Mounting Type DIN Rail Mount, Panel Mount
Discontinued product