Phoenix Contact QUINT-PS/3AC/24DC/5 Switch Mode DIN Rail Power Supply, 400V ac ac Input, 24V dc dc Output, 5A Output,

QUINT POWER generation maximizes the availability of your plant. With some featuring the SFB technology (Selective Fusebreaking Technology), the 6-times nominal current for 12 ms, can be the first time standard circuit breakers reliable and quick trigger. Faulty current paths are selectively shut down, the error is limited and important Plant parts remain in operation.

Selective Fusebreaking Technology (CRC Technology)
Worldwide use through wide-range input for DC and AC networks
Reliable start difficult loads with static power reserve POWER BOOST
High reliability through high MTBF> 500,000 h, long power failure bridging times > 20 ms, high voltage to 300 Vac
Preventive function monitoring DC-OK by professional signaling
Slim design
Conformal coating for extreme environments (Some models)

The QUINTPOWER power supply unit's feature terminal blocks on both the top & bottom of the unit. You'll need to strip 7mm length from your cable and insert it into the terminal blocks. A simple screw connection (M4 screw) will then lock your cable into the terminal block, providing an output or input connection. However, please follow all manafactuer installation instructions.

Typically these power supplies are mounted into cabinets and are used in industrial circumstances. They can be used for automation, machinery or any project that has modules that are mounted on DIN-rails.

665-7766, 665-7769, 665-7794 and 665-7790 do not feature SFB technology

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved, CSA, CB, ABS

Seeking a PSU with speedy circuit breaking built in? This DIN rail power supply from Phoenix Contact handles the job. As a three-phase unit, it accommodates very high loads, so it's a great shout for use in demanding industrial settings. It takes inputs between 320 and 575V AC or 450 and 800V DC and steps them down to a carefully controlled 24V DC ±1%.
As the unit offers output voltage adjustment, it's a breeze to tweak it to suit your application needs. You also have advanced preventative function monitoring watching your back, which means any critical operating states get flagged before faults can take hold.

• Isolation up to 4kV AC on inputs and outputs, so you and your equipment are protected against significant voltage surges
• Mean time between failures of over 1,290,000h at +25°C makes it a long-lasting option
• Efficiency of over 89% means it wastes very little energy as heat and stays cool without a heatsink or fan
• POWERBOOST static power reserve gives you a helping hand when starting load-drawing kit like motors
• Simply snaps onto a standard 35mm DIN rail without tools for easy installation