Siemens DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 10A Output Current

  • RS Stock No. 443-0275
  • Mfr. Part No. 6EP1334-1AL12
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): AT
Product Details

120 & 240W Switch Mode Slimline

The 1-phase and 2-phase SITOP modular are technology power supplies for sophisticated solutions and offer maximum functionality for use in complex plants and machines.
The 24 V/5 A and 10 A power supplies in a compact metal enclosure can be accommodated where only limited installation depth is available. For example, in covered machine supports or hinged frames.

24 V/5 A and 10 A, also available as version with PCB with protective coating.
1-phase and 2-phase ultra-wide input range
Extremely slim design – no lateral installation clearances required
Power Boost with 3 times the rated current (for 25 ms) for tripping protective devices
Extra power with 1.5 times the rated current (5 s/min) for brief functional overload
Selectable short-circuit response between constant current and restart
Optional symmetrical load distribution for parallel operation
Operating status on 3 LEDs
High degree of efficiency up to 91 %
Wide temperature range from -25 to +70 °C
Comprehensive certifications, such as cULus, ATEX or GL




CE, cULus





Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 132V ac
Output Voltage 24 V dc
Output Current 10 A
Power Rating 240W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 130mm
Width 60mm
Depth 60mm
Minimum Temperature 0°C
Maximum Temperature +60°C
Ripple And Noise 150mV Pk-Pk
Mounting Type DIN Rail Mount
Load Regulation 0.5%
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 505.49
(exc. GST)
$ 581.31
(inc. GST)
Per unit
1 - 2
3 - 4
5 +
Related Products
Economical and slim, the TDR is a 3 ...
Economical and slim, the TDR is a 3 phase power supply. It can be installed on TS-35/7.5 or TS-35/15 mounting rails and has been designed to allow space saving within cabinets. This PSU conforms to EN61000-3-2 and has been designed ...
Slim profile, for DIN-rail mounting. Alternative side-mounting for ...
Slim profile, for DIN-rail mounting. Alternative side-mounting for flat panels. High power factor by active power correction. Very high efficiency up to 94.5%Back power immunity150% peak current for 4 sec.Operating temperature range: –25°C to +70°C max.Adjustable output voltage. Short circuit ...
The SITOP Power DC-DC converter from Siemens is ...
The SITOP Power DC-DC converter from Siemens is used for connecting to networks over permanent wiring. Short circuit-proof and open circuit-proof, this DC-DC converter is the optimum power supply for automation solutions in the lower performance range. Its wide-range input ...
The TBL series is a new range of ...
The TBL series is a new range of small DIN-rail mount power supplies which have been designed particularly with building and factory automation applications in mind. The ultra-compact low profile cases fit in the standardised wall mounted control panels used ...