ABB, CP-E DIN Rail Panel Mount Power Supply, 48V dc Output Voltage, 10A Output Current

  • RS Stock No. 668-0930
  • Mfr. Part No. 1SVR427035R2000
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Switch mode power supplies CP-E series

The CP-E range of DIN Rail PSUs from ABB offer enhanced functionality. The switch mode power supply units are economic and can be operated at an ambient temperature of up to 70°C. With adjustable output voltages, they can also be adapted to the application required.
This range offers output voltages from 5 V dc to 48 V dc at output currents of 06.25 A to 20 A. Thermal efficiency of up to 90% means that there is low power and heat dissipation allowing operation of the PSU without any forced cooling.
The switch mode power supply can be snapped onto a DIN Rail according to IEC/EN 60715, and be mounted horizontally.

Features and Benefits

Switch mode power supplies CP-E

Primary switch mode power supplies
Adjustable output voltages
Wide input range
High efficiency
Low power loss and low heating
Free convection cooling (no forced cooling by fans)
Off-load, overload and continuous short-circuit proof, automatic restart
Integrated input fuse
U/I characteristic (fold-forward feature in the event of overload — no switch-off) for devices greater than 18 W
Decoupling module CP-RUD for applications with "true" redundancy
LED status "OUTPUT OK"
DC OK output (transistor) for 24 V devices (greater than 18 W)
Protection class IP20

Product Application Information

Redundancy module CP-RUD

For output-end parallel-redundant activated power supplies for decoupling, thus achieving true redundancy
Input/output current max. 5A

The primary switch mode power supply offers two voltage input ranges, enabling the supply with AC or DC. Furthermore it is equipped with two generous capacitors, which ensure mains buffering of at least 30 ms (at 230 V ac). These power supplies can be used worldwide also in high fluctuating networks and battery powered plants.

Approvals

UL 508, UL 60950, GOST, CCC, CE

Specifications
Attribute Value
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 90 → 264V ac
Output Voltage 48 V dc
Output Current 10 A
Power Rating 480W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 123.6mm
Width 175mm
Efficiency 90.0%
Maximum Temperature +70°C
Mounting Type DIN Rail Mount
Series CP-E
Ripple And Noise 100mV
Depth 123.6mm
Output Voltage Adjustment Range 47.0 to 56.0V
Minimum Temperature -40°C
5 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 521.12
(exc. GST)
$ 599.29
(inc. GST)
units
Per unit
1 +
$521.12
Related Products
A range of ultra slim single output DIN ...
Description:
A range of ultra slim single output DIN Rail power supplies with short circuit, overload and over voltage protection. These PSUs can be installed on DIN Rail TS-35/7.5 or 15 and offer cooling by free air convection. Universal AC input/Full ...
Ultra Slim Design - 32 mm150% Peak Load ...
Description:
Ultra Slim Design - 32 mm150% Peak Load for 3 seconds. Ambient Operation from -25 °C to +70 °CFull Load at 60 °C (24V/48V)High Efficiency - Up to 92%Volt-Free Contact for DC OKSelectable Parallel Operation85 to 264 VAC Operation3 Year ...
These power supply units may be installed within ...
Description:
These power supply units may be installed within the potentially hazardous area in which category 3 items are necessary. Universal power supply with extensive product range, including special variants and accessories. Starting heavy loads with high inrush currents reliably using ...
The new STEP POWER generation of compact power ...
Description:
The new STEP POWER generation of compact power supply units is particularly suitable for installation distributors and flat control panels thanks to its design. Their high degree of efficiency and the low standby losses make for high power efficiency. Easy ...