Phoenix Contact 3210538 PT 2.5-PE/L/N Series Grey, 0.14 → 4mm², Triple-Level, Push In Termination

The compact PT series from Phoenix Contact uses the advantages of the CLIPLINE complete system and is characterised by easy, direct conductor connection. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

50 % less insertion force
Direct plugging from 0.34 mm²
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver
Compact design and front connection facilitate wiring in the smallest of spaces
Double bridge shaft for an individual power distribution and supply
Uniform CLIPLINE complete standard accessory

Protect users and equipment from electrical current with this earth modular terminal block from Phoenix Contact. It's colour-coded for easy identification when viewed from the front, with the earth contacts in the internationally recognised green and yellow and two blue slots and two grey slots for the other contacts.
Termination is done according to the quick and easy PT series push-in connection method. All wires in sizes 0.34mm² and upwards are compatible and can be pushed simply into place. Because it needs low insertion force, user fatigue and the risk of wire damage are reduced. To insert smaller wires or to disconnect wires of all sizes, press the actuation button using a screwdriver of any type.
The block is part of Phoenix Contact's CLIPLINE system, which lets you build a modular assembly with seamless connectivity. The compact design and front connections help you make efficient use of space.

• Insulated with polyamide material that provides good electrical resistance
• UL94 V0 flammability rating indicates it's self-extinguishing in the event of a fire, to enhance workplace safety
• 6kV rated surge voltage enables it to withstand a high inrush current

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.