Megger MFT1825 Electrical Tester

  • RS Stock No. 901-1330
  • Mfr. Part No. MFT1825-AU
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MFT1825 Multifunction Tester (AU Version)

The MFT1825 Multifunction Tester (AU Version) is designed for testing low voltage electrical installations to IEC 60364. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The MFT1825 brings Type B RCD testing, 3-pole earth electrode testing with attached rod technique and stakeless testing to a downloading and rechargeable instrument.

Simple colour-coded test selection and large clear backlit display for ease of use
Two and three wire non-trip loop testing for RCD protected circuits
Internal memory and Bluetooth® communications
Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
3-terminal earth test and stakeless testing for spike resistance measurement
EN61010 CATIV safety ratings and tough IP54 case

Supplied with

MFT1825 Multifunction Tester, Switched probe SP5, Neck strap - Megger embroidered, 3 Wire lead set with prods and clips, AU/NZ plug test lead and AC battery charger.

Specifications
Attribute Value
Loop Impedance Test Type 2 Wire, 3 Wire
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 1000V
Maximum Voltage Measurement 600V
Test Type Continuity, RCD
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type Europe Mains
Continuity Test Current 205 mA @ 0 → 2 Ω
RCD Test Type AC, B
Test Standards IEC 60364
Safety Category CAT III 600 V, CAT V 300 V
Display Type Backlight
Maximum Operating Temperature +55°C
Maximum Continuity Resistance 99.9kΩ
Safety Category Voltage 300 V, 600 V
Plug Type Australia, New Zealand
Battery Type Rechargeable
Safety Category Level CAT III, CAT V
Weight 1 (with Battery)kg
Model Number p MFT1825
Height 85mm
Minimum Operating Temperature -10°C
IP Rating IP54
Minimum Continuity Resistance 0.01Ω
Dimensions 235 x 150 x 85mm
Length 235mm
Power Source Battery
Width 150mm
Temporarily out of stock - back order for despatch 21/07/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 2,956.00
(exc. GST)
$ 3,399.40
(inc. GST)
units
Per unit
1 +
$2,956.00
Related Products
Powersuite Professional Contractor offers all the features of ...
Description:
Powersuite Professional Contractor offers all the features of Power. Suite Lite with the addition of a data based client, assets and results management database for managing 17th Edition electrical and Portable Appliance test results. All records and downloaded data is ...
The Fluke 1660 series multifunction installation tester with ...
Description:
The Fluke 1660 series multifunction installation tester with an insulation test voltage of 50V, 100V, 250V, 500V, 1000V. It ensures safe and correct installation of fixed wiring to meet the necessary requirements. It delivers full-featured functionality and advanced measurement capabilities ...
The 3-in-1 multi-function tester, installation tester and pass/fail ...
Description:
The 3-in-1 multi-function tester, installation tester and pass/fail tester. Replaces multimeter, insulation tester, RCD tester, loop impedance tester and phase sequence tester. Installation verification tests to AS/NZS3017 covering earth continuity, insulation resistance, polarity, correct connections, fault loop ...
The DTR 8510 Dogital Transformer Ratiometer is fully ...
Description:
The DTR 8510 Dogital Transformer Ratiometer is fully automatic and uses the IEEE C57.12-90™-2006 test method. The DTR 8510 is a portable digital transformer ratiometer designed for on-site testing of power, potential and current transformers.When connected to a non-energized transformer, ...