Sensata Cynergy3 RSF50 Series Vertical Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc

The RSF50 series of compact vertical float switches have a single switching point, mounting is either from the top or bottom of the tank therefore access to the inside of the tank is required. These float switches are ideal for vending machine, printing systems, and chemical dosing applications.

Manufactured in a variety of materials with a choice of gasket materials to suit most commonly used liquids
Mounting in top or bottom of tank
N/O versions can be configured as N/C by float inversion
All units WRAS approved for use in hot and cold water

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

The cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.

epoxy sealed leadouts

Monitor liquid levels in your industrial tank with this float switch from Sensata Cynergy3. The floating component sits on the liquid surface and uses magnetic force to open or close the switch whenever levels go up or down. This makes it useful for preventing overflows when filling an industrial tank, or for knowing when liquid levels are low and the tank needs refilling. This is a vertical float switch that mounts to the top or bottom of the tank, so you don't need side access. Use this switch for applications such as water wells and boilers.

• Polyphenylene sulfide (PPS) body material protects the internal magnets from interference and damage
• Maximum current capacity of 1A for dependable use with low-voltage currents
• Wide operating temperature range of -10°C to +120°C for use in both cold and hot liquids
• Long cable length of 1m ensures a flexible connection

The switch has normally open (NO) or normally closed (NC) output options, giving you flexibility in the layout of your electrical circuit.