Si7201-B-07-IVR Silicon Labs,, Omnipolar Hall Effect Sensor Switch, 3-Pin SOT-23

  • RS Stock No. 144-1561
  • Mfr. Part No. Si7201-B-07-IVR
  • Manufacturer Silicon Labs
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Si720x Series Hall Effect Magnetic Sensors

A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, and the range includes versions with a tamper indication facility. Typical applications include security system magnetic detection, position sensing and revolution counting.

• Industry-leading sensitivity allows use with larger air gaps and smaller magnets
• Low power consumption to improve operating life in battery powered applications
• Low voltage (1.7-5.5V) and High voltage (3.3-26.5V) versions
• Unipolar switching and Latch versions available
• Compact 3-pin SOT23 package
• AEC-Q100 Qualified for automotive applications

The Si720x family of Hall effect magnetic sensors and latches from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13- bit analog-to-digital converter, and flexible comparator circuit. The Si720x family incorporates digital signal processing to provide precise compensation for temperature and offset drift. Compared with existing Hall effect sensors, the Si720x family offers industry-leading sensitivity, which enables use with larger air gaps and smaller magnets.

High-Sensitivity Hall Effect Sensor
Maximum BOP operating point/minim
field strength of <1.1 mT
Omnipolar or unipolar operation
Sensitivity Drift < ±3% over Temperatur
Selectable Output Options
Open-drain output
Digital high/low output
2-wire current source

Hall Effect Sensors, Silicon Labs

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point ±0.6 mT
Maximum Magnetic Sensor Operating Point ±2 mT
Minimum Operating Supply Voltage 1.7 V
Maximum Operating Supply Voltage 5.5 V
Length 2.9mm
Width 1.6mm
Height 1.15mm
Dimensions 2.9 x 1.6 x 1.15mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 0.6 mT
Automotive Standard AEC-Q100
On back order for despatch 15/10/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (On a Reel of 3000)
$ 0.703
(exc. GST)
$ 0.808
(inc. GST)
units
Per unit
Per Reel*
3000 - 3000
$0.703
$2,109.00
6000 - 6000
$0.684
$2,052.00
9000 +
$0.665
$1,995.00
*price indicative
Related Products
The ISM330DLC is a system-in-package featuring a high-performance ...
Description:
The ISM330DLC is a system-in-package featuring a high-performance 3D digital accelerometer and 3D digital gyroscope tailored for Industry 4.0 applications.ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers ...
Integrated quadrature sensor ICPole size independent operation4-pin quadrature, ...
Description:
Integrated quadrature sensor ICPole size independent operation4-pin quadrature, open collector outputs-40°C to 150°C operating temperature range. Zero speed operation. No calibration required. Insensitive to mechanical vibration. Protection against reverse polarity and short circuit Applications. Industrial speed ...
3D magnetic flux density sensing of ±160mTProgrammable flux ...
Description:
3D magnetic flux density sensing of ±160mTProgrammable flux resolution down to 65μT (typ.)X-Y angular measurement mode. Power down mode with 7nA (typ) power consumption12bit data resolution for each measurement direction plus 10bit temperature sensor. Variable update frequencies and power modes ...
Magnetoresistive circuits, single axis and double axis comprising ...
Description:
Magnetoresistive circuits, single axis and double axis comprising a Wheatstone bridge with 4 magneto resistive branches. Create a compensation field to eliminate an unwanted field (offset+, offset-)Can be re-initialised in the event of drift. Measure movement or angular or linear ...