A1220EUA-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems

The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.

A south pole turns on the output and a north pole turns off the output.

The voltage regulator permits operation with supply voltages of 3 V to 24 V.

Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.

AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -40 Gs
Maximum Magnetic Sensor Operating Point 40 Gs
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 45 Gs
On back order for despatch 31/07/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Bag of 500)
$ 1.46
(exc. GST)
$ 1.68
(inc. GST)
units
Per unit
Per Bag*
500 +
$1.46
$730.00
*price indicative
Related Products
A range of linear output Hall Effect sensor ...
Description:
A range of linear output Hall Effect sensor ICs, designed for position and proximity sensing from Diodes Inc.
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...
Current sensing package with flip-chip technology3000 Vrms galvanic ...
Description:
Current sensing package with flip-chip technology3000 Vrms galvanic isolation. High accuracy over temperature. Typical output error of 1%.
The Allegro Microsystems A1230 is a dual-channel, bipolar ...
Description:
The Allegro Microsystems A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements. Each element provides a separate digital output for speed and direction signal processing.The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy ...