A1104EUA-T Allegro Microsystems,, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Unipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 50 Gs
Maximum Magnetic Sensor Operating Point 350 Gs
Minimum Operating Supply Voltage 3.8 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type Ultra Mini SIP
Typical Magnetic Sensor Hysteresis 55 Gs
30 : Next working day
530 Within 5 working day(s) (Global stock)
Price (ex. GST) Each (In a Pack of 5)
$ 2.228
(exc. GST)
$ 2.562
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$2.228
$11.14
25 - 95
$1.972
$9.86
100 - 245
$1.852
$9.26
250 - 495
$1.834
$9.17
500 +
$1.79
$8.95
*price indicative
Packaging Options:
Related Products
Bipolar Latch Hall IC detects polarity change for ...
Description:
Bipolar Latch Hall IC detects polarity change for S and N. The operation is more stable comparing to magnetic force detection (The duty on output pulse will be consistent). It is perfect fit as an interface to wheel key and ...
Omnipolar detection Hall ICs can detect both S-and ...
Description:
Omnipolar detection Hall ICs can detect both S-and N-pole magnetic fields, simplifying magnet management. Omnipolar detectionMicropower operation (small current using intermittent operation method)Ultra-compact CSP4 packageFor 1.8V Power supply voltageLow sensitivity (BOP TYP +/-6.3mT)High ESD resistance ...
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect ...
Description:
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. ...
Description:
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.