A3291KUA-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

A3290/1 Chopper Stabilised Precision Hall Effect Latches

The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.

A south polarity magnetic field is required to turn on the output and a north polarity field to turn off the output. An on-board regulator permits operation with supply voltages in the range of 3 V to 24 V.

Symmetrical switchpoints
Resistant to physical stress
Output short-circuit protection
Operation from unregulated supply
Reverse battery protection

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -100 Gs
Maximum Magnetic Sensor Operating Point 100 Gs
Minimum Operating Supply Voltage 4.2 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 200 (Maximum) Gs
30 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 2.24
(exc. GST)
$ 2.58
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$2.24
$11.20
25 - 95
$2.128
$10.64
100 - 245
$1.674
$8.37
250 - 495
$1.656
$8.28
500 +
$1.638
$8.19
*price indicative
Packaging Options:
Related Products
Infineon linear Hall effect ICs are designed for ...
Description:
Infineon linear Hall effect ICs are designed for linear position detection and current measurement applications. The Hall effect sensors may include features such as a ratiometric analogue output. The sensors can be used for applications in linear and angular position ...
Description:
Allegro Current sensor ICs in CA and CB packages. Conductor resistance of 100 μΩ typical for ultra low-power loss. Automotive grade options for harsh applications environments3000 Vrms galvanic isolation.
A range of linear output Hall Effect sensor ...
Description:
A range of linear output Hall Effect sensor ICs, designed for position and proximity sensing from Diodes Inc.
Magnetoresistive circuits, single axis and double axis comprising ...
Description:
Magnetoresistive circuits, single axis and double axis comprising a Wheatstone bridge with 4 magneto resistive branches. Create a compensation field to eliminate an unwanted field (offset+, offset-)Can be re-initialised in the event of drift. Measure movement or angular or linear ...