TLE4906LHALA1 Infineon,, Unipolar Hall Effect Sensor, 2.7 18 V, 3-Pin SSOP
- RS Stock No. 753-3251
- Mfr. Part No. TLE4906LHALA1
- Manufacturer Infineon
Hall Effect Switches, Infineon
A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.
Hall Effect Sensors, Infineon
A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.
| Attribute | Value |
|---|---|
| Magnetic Type | Unipolar |
| Mounting Type | Through Hole |
| Pin Count | 3 |
| Minimum Magnetic Sensor Release Point | 4.7 mT |
| Maximum Magnetic Sensor Operating Point | 12.9 mT |
| Minimum Operating Supply Voltage | 2.7 V |
| Maximum Operating Supply Voltage | 18 V |
| Length | 4.16mm |
| Width | 1.52mm |
| Height | 3.29mm |
| Dimensions | 4.16 x 1.52 x 3.29mm |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +150 °C |
| Package Type | SSOP |
| Typical Magnetic Sensor Hysteresis | 1.5 mT |
