Megger MIT230, Insulation Tester 999MΩ CAT III 300 V

  • RS Stock No. 535-3191
  • Mfr. Part No. MIT230-EN
  • Warranty 3 Year
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MIT230 Insulation & Continuity Tester

The MIT230 incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.

Features & Benefits

Insulation testing to 1000 MΩ
Dual & triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition & to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200 mA down to 0.01 Ω resolution
Automatic discharge of circuit under test
1 mA test current at selected voltage range
Default voltmeter automatically switches in when the instrument is connected to a circuit with an AC or DC voltage greater than 25 V
Auto-ranging analogue arc scale shows only the scale in use
Live circuit warning above 25 V, also inhibits insulation & continuity tests above 50 V
Lead resistance compensation on continuity
Hands free continuity testing Auto power-down after 5 min
Complies with IEC 1010-1 safety standard installation Category III, 600 V phase to earth
Conforms to EN61557-1
Tests to BS7671, 713-02, 713-03, 713-04, 713-06, 713-08, 413-04-04

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

6 x AA alkaline batteries, test leads, crocodile clips, carry case, instructions

Warning

  • When measuring voltages, the use of fused test leads is recommended for personal safety.
Specifications
Attribute Value
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 1000V dc
Maximum Insulation Resistance Measurement 999MΩ
Display Type LCD
Test Current 200mA
Battery Life 3000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 300V
Safety Category CAT III 300 V
Model Number p MIT230
Battery Type AA
Length 195mm
Weight 530g
Width 98mm
Dimensions 195 x 98 x 40mm
Height 40mm
2 In stock for delivery within 1 working day(s)
Price (ex. GST) Each
$ 965.70
(exc. GST)
$ 1,110.56
(inc. GST)
units
Per unit
1 +
$965.70
Related Products
IR windows allow safe and effective thermal imaging ...
Description:
IR windows allow safe and effective thermal imaging of fully energised electrical systems through closed panels and doors during routine electrical maintenance / inspection. Arc flash resistant to 50 kA (IEC62271-100 and IEC62271-200)Certified to IP65 (BSEN60529) when open or closed. ...
The Instaltest XC is a revolutionary touch screen ...
Description:
The Instaltest XC is a revolutionary touch screen multifunction installation tester for live and dead installation testing, verification and diagnosis, as well as high volume RCD testing with bar code scanning of asset IDs. Test results can be saved for ...
The Instaltest XD is a variant of the ...
Description:
The Instaltest XD is a variant of the Instal. Test XC, a revolutionary touch screen multifunction installation tester for live and dead installation testing, verification and diagnosis, as well as high volume RCD testing with bar code scanning of asset ...
The Telaris Pro. Install Series have an IR ...
Description:
The Telaris Pro. Install Series have an IR (infrared) port which allows you to connect the tester to a computer and upload test data using a Amprobe PC software.This automates your troubleshooting or recording process, reduces the possibility of manual ...